Experimental Research of Cutting Stainless Steel by High Pressure Abrasive Water Jet under Water
-
摘要: 采用高压磨料水射流切割装置,用3档切割压力(320、350、380 MPa),分别在2、5、8 mm切割靶距和6种切割速度下,对不锈钢进行水下切割实验。分析切割压力、靶距、切割速度等参数对切割厚度的影响,建立基于实测数据的半经验数学模型。对获得的实验数据进行分析表明,切割压力、靶距和速度与被切割厚度呈现指数关系。Abstract: The High Pressure Abrasive Water Jet is designed to cut stainless steel under water at the pressure of 320,350,380 MPa,with 2,5,and 8 mm target distance,and six cutting velocity.The effects of pressure,target distance and velocity on cutting thickness are analyzed,and then a half-experience math model is established based on the test data.The data analysis shows that pressure,target distance and velocity have exponential relation with cutting thickness.
-
计量
- 文章访问数: 15
- HTML全文浏览量: 5
- PDF下载量: 0
- 被引次数: 0