Study on Creep Property of Candidate Stainless Steels for SCWR
-
摘要: 采用RDL50型蠕变持久试验机研究奥氏体不锈钢316Ti、347、HR3C和6XN在550℃/90 MPa、600℃/85 MPa、650℃/70 MPa和700℃/65 MPa条件下的蠕变性能。结果表明,在550℃/90 MPa条件下,347的蠕变性能最佳,但随着温度的提高,600℃以上HR3C的蠕变性能优势逐渐体现;316Ti在4种条件下的蠕变性能均最差。结合实验数据分析,应力指数n排序为316Ti>347>HR3C,激活能Q排序为HR3C>347>316Ti,进一步表明了上述3种材料蠕变性能的优劣为HR3C>347>316Ti。Abstract: The creep property of four austenitic stainless steels(316Ti,347,HR3C and 6XN) was investigated with test machine under four conditions: 550℃/90 MPa,600℃/85 MPa,650℃/70 MPa and 700℃/65 MPa.347 showed the best creep property under the 550℃/90 MPa condition while HR3C gradually got the upper hand above 600℃.316Ti displays the worst creep property under all the test conditions.Based on the test data analysis,the stress index followed an order of 316Ti > 347 > HR3C and the activation energy HR3C > 347 >316Ti,which suggests the creep property order as HR3C > 347 >316Ti.
-
计量
- 文章访问数: 27
- HTML全文浏览量: 10
- PDF下载量: 0
- 被引次数: 0