Research on Wall-to-Vapor Convective Heat Transfer Model in Reflooding Phase of Typical PWR Based on RELAP5
-
摘要: 基于FLECHT SEASET再淹没实验,评价RELAP5程序再淹没模块的合理性。研究表明,现有的RELAP5程序在模拟再淹没实验低流速工况时,低估了燃料包壳的峰值温度。结合典型压水堆再淹没过程的特点,考虑蒸汽流动状态和棒束结构的影响,对壁面蒸汽对流换热模型进行修改,建立适用于典型压水堆再淹没过程的壁面蒸汽对流换热新模型。改进前后程序对包壳峰值温度的计算结果对比,验证了新模型的合理性。Abstract: This paper evaluates the rationality of RELAP5 reflood models based on the reflooding experiments FLECHT SEASET. The calculated results show that the current version of RELAP5 underestimates the peak clad temperature when simulating the low flooding rate test. Combined the characteristics of the reflooding phase of typical PWR and considered the vapor flow state and rod bundle configuration effects, the wall-to-vapor convective heat transfer model is modified. A new wall-to-vapor convective heat transfer model is established for the simulation of the typical PWR reflooding phase. Through the validation of this new model by comparing the calculation results of peak clad temperature from original code and modified code, it can be concluded that the new model is reasonable.
-
计量
- 文章访问数: 13
- HTML全文浏览量: 5
- PDF下载量: 0
- 被引次数: 0
下载:
