Application of Digital Twin Technology in the Design Phase of Floating Nuclear Power Plants
-
摘要: 以浮动核电站换料作业为研究对象，提出数字孪生技术应用到浮动核电站的技术路线，整合设计数据并开发核燃料装卸舱的数字孪生系统，建立虚拟舱室模型并开发新燃料运输过程控制程序，采用基于过程控制中的对象链接与嵌入技术统一架构（OPC UA）的通讯协议实现虚拟舱室模型和控制系统的双向交互。结果表明，开发的数字孪生系统能够为换料作业操作设计过程的人员站位、操作流程设计优化提供依据。因此，本文提出的数字孪生技术应用方法能够服务于浮动核电站的设计阶段，并为其在浮动核电站全生命周期的应用提供参考。Abstract: The research object is the reloading operation process of a floating nuclear power plant. A technical route of digital twin technology is proposed for application in floating nuclear power plants. Design data is integrated and used to develop a digital twin system for nuclear fuel handling cabins. The virtual cabin model is established, and the new fuel transportation process control program is developed. Based on the OPC Unified Architecture (OPC UA) communication protocol, the two-way interaction between the virtual cabin model and the control system is realized. The results show that the digital twin system can provide a reference for the determination of personnel positions and the optimization of the reloading operation control process. Therefore, digital twin technology can serve the design phase of floating nuclear power plants, and can provide a reference for the application of digital twin technology in the full life cycle of floating nuclear power plants.
-
Key words:
- Floating nuclear power plants /
- Digital twin /
- Reloading /
- Design optimization
-
图 1 数字孪生技术应用于浮动核电站的技术路线
Figure 1. Technical Route of the Application of Digital Twin Technology in Floating Nuclear Power Plant
图 2 核燃料装卸舱数字孪生系统架构
Figure 2. Digital Twin System Architecture for Nuclear Fuel Handling Cabin
图 4 新燃料接收控制流程和控制逻辑流程图
Figure 4. Control Flow and Control Logic Flow Chart for New Fuel Receiving
表 1 开发环境
Table 1. Development Environment
模块 硬件环境 软件环境 控制系统 PC机1台 WinCC S7-1500系列PLC TIA portal 虚拟舱室模型 PC机1台 虚拟现实引擎 双向交互接口 戴尔机架式服务器 虚拟化数据中心 
下载: 导出CSV
-
[1] 陶飞,刘蔚然,刘检华,等. 数字孪生及其应用探索[J]. 计算机集成制造系统,2018, 24(1): 4-21. [2] 屈挺,张凯,罗浩,等. 物联网驱动的"生产-物流"动态联动机制、系统及案例[J]. 机械工程学报,2015, 51(20): 36-44. [3] 陶飞,张萌,程江峰,等. 数字孪生车间−一种未来车间运行新模式[J]. 计算机集成制造系统,2017, 23(1): 1-9. [4] 刘佳,刘立志,蔡龙奇,等. 浮动核电站系统典型用泵动力吸振器的设计[J]. 核动力工程,2020, 41(1): 75-78. [5] 李庆,宋丹戎,曾未,等. ACP100S浮动核电站总体设计及验证[J]. 核动力工程,2020, 41(5): 189-192. -
计量
- 文章访问数: 572
- HTML全文浏览量: 174
- PDF下载量: 127
- 被引次数: 0
