Test and Verification for Digital Nuclear Instrumentation System Prototype on Reactor
-
摘要: 针对目前国内核电厂核仪表系统设备主要依赖进口的现状,设计研发了一套数字化核仪表系统样机,系统样机主要包括中子探测器组件、信号调理和处理样机以及信号监控设备。通过介绍样机在商用堆上的安装和试验情况,详细分析了反应堆启堆、升功率、满功率及降功率运行期间的试验数据。试验结果表明,中子探测器与信号调理和处理样机配合良好,整套系统样机运行稳定可靠。Abstract: In view of the current situation of nuclear instrumentation system equipment mainly relying on import in the current domestic nuclear power plant, a set of digital nuclear instrumentation system prototype was designed and developed. The system prototype mainly includes neutron detector assembly, signal conditioning and processing prototype and signal monitoring equipment. By introducing the installation and test of the prototype on the commercial reactor, the test data during reactor startup, power increase, full power and power reduction are analyzed in detail. The test results show that the neutron detector cooperates well with the signal conditioning and processing prototype, and the whole system prototype runs stably and reliably.
-
表 1 设备安装后绝缘电阻和分布电容测试
Table 1. Test of Insulation Resistance and Distributed Capacitance after Equipment Installation
测试项 分布电容/nF 绝缘电阻/109Ω 源量程中子探测器信号
测量通道13.61 127 中间量程中子探测器
高压测量通道9.374 210 中间量程中子探测器
补偿电压测量通道9.176 230 中间量程中子探测器
信号测量通道9.283 230 功率量程中子探测器
高压测量通道6.605 216 功率量程中子探测器
测量通道15.663 240 功率量程中子探测器
测量通道25.885 640 功率量程中子探测器
测量通道35.903 100 功率量程中子探测器
测量通道45.823 500 功率量程中子探测器
测量通道55.823 1310 功率量程中子探测器
测量通道65.736 1040 -
[1] 张坚,刘顺,邹向阳,等. 三代压水堆核电厂数字化仪控的测试方案[J]. 核动力工程,2015, 36(S1): 30-33. [2] 北京核仪器厂. 用于核反应堆的辐射探测器 特性及其测试方法: GB/T 7164—2004[S]. 北京: 中国标准出版社, 2004.