Analysis and Research on the Influence of Asymmetric Pumping Chamber on the Performance of CAP1400 Nuclear Coolant Pump
-
摘要: 压水室作为主泵的边界，不仅承担着压力而且还是周向流出的导叶与单向流动的管路之间的唯一桥梁。为探究压水室对整机性能的影响，以CAP1400的1:2.5缩比模型为目标，提出了一种关于主泵非对称压水室的设计方法，并设计出4种不同几何尺寸的非对称模型。借助计算流体动力学（CFD）数值方法，得到含有口环间隙的核主泵全三维模型的内部流场、外特性及瞬态载荷信息。通过对比分析获得结论：4种非对称压水室模型将上盖板处径向载荷减小60%以上，使叶轮及总径向载荷的主频幅值减小13%以上；在保证径向载荷有明显改善的同时，还能有效提升泵体效率和扬程，前者改善更为明显，提升范围为0.57%~0.83%。Abstract: As the boundary of the nuclear coolant pump, the pumping chamber not only bears the pressure, but also is the only bridge between the guide vane flowing in the circumferential direction and the unidirectional flow pipeline. In order to explore the influence of pumping chamber on the performance of the whole machine, a design method for asymmetric pumping chamber of nuclear coolant pump is proposed based on CAP1400’s 1:2.5 scale model, and four kinds of asymmetric models with different geometric dimensions are designed. With the computational fluid dynamics (CFD) numerical method, the internal flow field, external characteristics and transient load information of the full three-dimensional model of the nuclear coolant pump with orifice ring clearance are obtained. Through comparative analysis, the following conclusions are obtained: four asymmetric pumping chamber models reduce the radial load at the upper cover plate by more than 60%, and reduce the main frequency amplitude of the impeller and the total radial load by more than 13%; While ensuring the obvious improvement of radial load, it can also effectively improve the pump efficiency and head. The former is more obvious, with a lifting range of 0.57% to 0.83%.
-
Key words:
- Nuclear coolant pump /
- Asymmetric /
- Pumping chamber /
- CAP1400 /
- Radial load
-
图 5 数值计算与实验结果的对比验证
Figure 5. Comparison and Verification between Numerical Calculation and Experimental Results
-
[1] LU Y M, WANG X F, LIU H R, et al. Investigation of the effects of the impeller blades and vane blades on the CAP1400 nuclear coolant pump’s performances with a united optimal design technology[J]. Progress in Nuclear Energy, 2020, 126: 103426. doi: 10.1016/j.pnucene.2020.103426 [2] 赖喜德,叶道星,陈小明,等. 类球形压水室的混流式核主泵压力脉动特性[J]. 动力工程学报,2020, 40(2): 169-176. [3] NI D, ZHANG N, GAO B, et al. Dynamic measurements on unsteady pressure pulsations and flow distributions in a nuclear reactor coolant pump[J]. Energy, 2020, 198: 117305. doi: 10.1016/j.energy.2020.117305 [4] 张栋俊,徐士鸣. 类球形压水室出流管形状对核主泵性能的影响[J]. 水泵技术,2010(1): 21-25,30. [5] 朱荣生,李小龙,袁寿其,等. 反应堆主泵压水室出口收缩角对水力性能的影响[J]. 核动力工程,2012, 33(2): 97-103. doi: 10.3969/j.issn.0258-0926.2012.02.021 [6] 李靖. 核主泵导叶压水室结构对水力性能影响分析与研究[D]. 大连: 大连理工大学, 2014. [7] CHENG X R, BAO W R, FU L, et al. Sensitivity analysis of nuclear main pump annular casing tongue blend[J]. Advances in Mechanical Engineering, 2017, 9(7): 168781401770659. [8] PEI J, YUAN S Q, YUAN J P, et al. Numerical analysis on asymmetrical distribution of flow field and radial force for a centrifugal pump[C]//2009 International Conference on Energy and Environment Technology. Guilin: IEEE, 2009. [9] LIU H R, LU Y M, YANG J G, et al. Aeroacoustic optimization of the bionic leading edge of a typical blade for performance improvement[J]. Machines, 2021, 9(8): 175. doi: 10.3390/machines9080175 [10] CUI B L, LI X D, RAO K, et al. Analysis of unsteady radial forces of multistage centrifugal pump with double volute[J]. Engineering Computations, 2018, 35(3): 1500-1511. doi: 10.1108/EC-12-2016-0445 [11] LU R, YUAN J P, WANG L Y, et al. Effect of volute tongue angle on the performance and flow unsteadiness of an automotive electronic cooling pump[J]. Proceedings of the Institution of Mechanical Engineers, Part A:Journal of Power and Energy, 2021, 235(2): 227-241. doi: 10.1177/0957650920915306 [12] 陆国成,左志钢,刘树红,等. 压水室形状对某离心泵径向力影响的数值模拟[J]. 工程热物理学报,2015, 36(4): 770-774. [13] 王秀勇,刘志远,刘宇宁,等. 基于分离涡模拟的核主泵全工况水力性能计算精度研究[J]. 核动力工程,2021, 42(2): 125-130. -
下载:
点击查看大图
图(11)
计量
- 文章访问数: 1873
- HTML全文浏览量: 77
- PDF下载量: 48
- 被引次数: 0
