Research on High-Temperature Resistant Strain Sensor Based on Fiber-Optic Fabry-Perot Structure
-
摘要: 为了研制一种适用于反应堆一回路高温环境下机械测量的微型应变传感器，基于光纤珐珀（FP）结构光学原理、解调原理和封装技术研究，提出传感器的热机耦合模型，设计出一种基于光纤FP结构的耐高温应变传感器及其解调系统，并对其在常温空气中和高温中压水环境中进行动态测试。研究和测试结果表明，该高温光纤FP应变传感器及其解调系统能够在高温、中压以及水环境下稳定工作，且应变传感器的测量工作范围为0~4000 με，解调系统速度达到5 kHz。本研究设计的高温光纤FP应变传感器及其解调系统能够用于反应堆一回路高温环境下的应变测量，从而为反应堆一回路高温环境下的监测提供了一种有效的监测方法。
-
关键词:
- 反应堆一回路 /
- 光纤珐珀（FP）应变传感器 /
- 解调系统 /
- 应变测量
Abstract: In order to develop a micro strain sensor suitable for mechanical measurement in the high temperature environment of the reactor first loop , based on the principle of optics, demodulation principle and packaging technology of the fiber-optic Fabry-Perot (FP) structure, the thermal-mechanical coupling model of the sensor is proposed, a high temperature resistant strain sensor based on the fiber-optic FP structure and its demodulating system are designed, and its dynamic test is carried out in the normal temperature air, high temperature and medium pressure water environment. The research and test results show that the high temperature strain resistant fiber optic strain sensor and its demodulating system can operate stably in high temperature, medium pressure and water environment, and the measuring range of the strain sensor is 0~4000 με, the accuracy is 0.125%FS, and the speed of the demodulating system is 5 kHz. The high temperature resistant strain fiber optic strain sensor and its demodulating system designed in this study can be used to measure the strain in the high temperature environment of the reactor first loop, thus providing an effective monitoring method for the monitoring in the high temperature environment of the reactor reactor first loop.-
Key words:
- Reactor first loop /
- Fiber-optic FP sensor /
- Demodulating system /
- Strain measurement
-
图 2 平行平板多光束干涉原理图
Figure 2. Schematic Diagram of Parallel-Plate Multiple-Beam Interference
图 3 FBG温度传感器温度补偿示意图
Figure 3. Schematic Diagram of FBG Temperature Sensor Temperature Compensation
-
[1] 周智,欧进萍. 土木工程智能健康监测与诊断系统[J]. 传感器技术,2001, 20(11): 1-4. [2] 王宁. 基于波形分析的光纤法珀应变仪在桥梁应变监测中的应用[D]. 重庆: 重庆大学, 2002. [3] 黄尚廉,陈伟民,饶云江,等. 光纤应变传感器及其在结构健康监测中的应用[J]. 测控技术,2004, 23(5): 1-4,8. doi: 10.3969/j.issn.1000-8829.2004.05.001 [4] 李奇思. 碳化硅膜片式光纤高温压力传感器关键制备技术研究[D]. 太原: 中北大学, 2019. [5] 靳伟, 阮双琛. 光纤传感技术新进展[M]. 北京: 科学出版社, 2005: 23-29. -
下载:
图(8)
计量
- 文章访问数: 14
- HTML全文浏览量: 17
- PDF下载量: 6
- 被引次数: 0
