[1] |
IAEA. Review of fuel failures in water cooled reactors: Nuclear Energy Series No. NF-T-2.1[R]. Vienna: IAEA, 2010.
|
[2] |
LAZAREVIC S, LU R Y, FAVEDE C, et al. Investigating grid-to-rod fretting wear of nuclear fuel claddings using a unique autoclave fretting rig[J]. Wear, 2018, 412-413: 30-37. doi: 10.1016/j.wear.2018.06.011
|
[3] |
QU J, COOLEY K M, SHAW A H, et al. Assessment of wear coefficients of nuclear zirconium claddings without and with pre-oxidation[J]. Wear, 2016, 356-357: 17-22. doi: 10.1016/j.wear.2016.02.020
|
[4] |
JIANG H, QU J, LU R Y, et al. Grid-to-rod flow-induced impact study for PWR fuel in reactor[J]. Progress in Nuclear Energy, 2016, 91: 355-361. doi: 10.1016/j.pnucene.2016.06.003
|
[5] |
LUCADAMO G A, HOWLAND W H, TYMIAK-CARLSON N, et al. Characterization and simulation methods applied to the study of fretting wear in Zircaloy-4[J]. Wear, 2018, 402-403: 11-20. doi: 10.1016/j.wear.2018.01.012
|
[6] |
ZHANG L F, LAI P, LIU Q D, et al. Fretting wear behavior of zirconium alloy in B-Li water at 300℃[J]. Journal of Nuclear Material, 2018, 499: 401-409. doi: 10.1016/j.jnucmat.2017.12.003
|
[7] |
LAI P, ZHANG H, ZHANG L F, et al. Effect of micro-arc oxidation on fretting wear behavior of zirconium alloy exposed to high temperature water[J]. Wear, 2019, 424-425: 53-61. doi: 10.1016/j.wear.2019.02.001
|
[8] |
KIM H K, LEE Y H, LEE K H. On the geometry of the fuel rod supports concerning a fretting wear failure[J]. Nuclear Engineering and Design, 2008, 238(12): 3321-3330.
|
[9] |
LEE Y H, KIM H K. Effect of spring shapes on the variation of loading conditions and the wear behaviour of the nuclear fuel rod during fretting wear tests[J]. Wear, 2007, 263(1-6): 451-457. doi: 10.1016/j.wear.2006.12.071
|
[10] |
LEE Y H, KIM H K. Evaluation of fretting wear behavior on the simulated supporting structures of a dual-cooled nuclear fuel rod[J]. Materials Science Forum, 2010, 654-656: 2564-2567.
|
[11] |
LEE Y H, KIM H K. Fretting wear behavior of a nuclear fuel rod under a simulated primary coolant condition[J]. Wear, 2013, 301(1-2): 569-574. doi: 10.1016/j.wear.2013.01.067
|
[12] |
LEE Y H, KIM H K, KANG H S, et al. Fretting wear behaviors of a dual-cooled nuclear fuel rod under a simulated rod vibration[J]. AIP Conference Proceeding, 2012, 1448(1): 235-241.
|
[13] |
KIM K T, SUH J M. Impact of nuclear fuel assembly design on grid-to-rod fretting wear[J]. Journal of Nuclear Science and Technology, 2009, 46(2): 149-157. doi: 10.1080/18811248.2007.9711516
|
[14] |
HU Z P. Developments of analyses on grid-to-rod fretting problems in pressurized water reactors[J]. Progress in Nuclear Energy, 2018, 106: 293-299. doi: 10.1016/j.pnucene.2018.03.015
|
[15] |
HU Z P, THOULESS M D, LU W. Effects of gap size and excitation frequency on the vibrational behavior and wear rate of fuel rods[J]. Nuclear Engineering and Design, 2016, 308: 261-268. doi: 10.1016/j.nucengdes.2016.08.038
|
[16] |
KOVÁCS S, STABEL J, REN M M, et al. Comparative study on rod fretting behavior of different spacer spring geometries[J]. Wear, 2009, 266(1-2): 194-199. doi: 10.1016/j.wear.2008.06.010
|
[17] |
SHIN M K, LEE H A, LEE J J, et al. Optimization of a nuclear fuel spacer grid spring using homology constraints[J]. Nuclear Engineering and Design, 2008, 238(10): 2624-2634. doi: 10.1016/j.nucengdes.2008.04.003
|
[18] |
SONG K N, LEE S B, SHIN M K, et al. New spacer grid to enhance mechanical/structural performance[J]. Journal of Nuclear Science and Technology, 2010, 47(3): 295-300. doi: 10.1080/18811248.2010.9711957
|