一回路注锌技术应用及注锌加药设备设计

邹伟; 林根仙; 孙云

doi:10.13832/j.jnpe.2024.02.0203

一回路注锌技术应用及注锌加药设备设计

doi: 10.13832/j.jnpe.2024.02.0203

邹伟^{1, 2,},
林根仙^{1, 2},
孙云^{1, 2}

1.
苏州热工研究院有限公司，江苏苏州，215000
2.
国家核电厂安全及可靠性工程技术研究中心，江苏苏州，215000

详细信息

作者简介:
邹　伟（1988—），女，高级工程师，硕士研究生，现主要从事核电厂水化学研究工作，E-mail: 3168170350@qq.com

中图分类号: TL12；TQ050.2
计量
- 文章访问数: 197
- HTML全文浏览量: 81
- PDF下载量: 36
- 被引次数: 0
出版历程
- 收稿日期: 2023-04-19
- 修回日期: 2023-12-11
- 刊出日期: 2024-04-12

Primary Zinc Injection Technology Application and Zinc Injection and Dosing Equipment Design

Zou Wei^{1, 2
,},
Lin Genxian^{1, 2},
Sun Yun^{1, 2}

1.
Suzhou Nuclear Power Research Institute Co., Ltd., Suzhou, Jiangsu, 215000, China
2.
National Nuclear Power Plant Safety and Reliability Engineering Technology Research Center, Suzhou, Jiangsu, 215000, China

摘要

摘要: 一回路注锌技术的应用使得一回路设备表面生成的氧化膜更加稳定，起到降低机组集体剂量的作用。通过分析注锌对机组影响，结合国内某在运压水堆机组注锌目标浓度和现场设备存放条件，设计一套注锌加药设备，明确其设计方案、设备部件参数和工作流程。该设备由溶液混合单元、过滤单元、加药单元及控制单元组成，实现机组运行期间添加醋酸锌和大修期间添加双氧水两种功能应用。
- 压水堆 /
- 一回路注锌 /
- 加药设备
Abstract: The application of primary zinc injection technology makes the oxide film generated on the surface of the primary equipment more stable and plays a role in reducing the collective dose of the unit. By analyzing the effect of zinc injection on the unit, and combining the target concentration of zinc injection in a domestic PWR unit and the conditions of the on-site equipment, a set of zinc injection and dosing equipment is designed, and its design scheme, equipment component parameters and working flow are defined. The equipment is composed of a solution mixing unit, a filtration unit, a dosing unit and a control unit, which can be used to add zinc acetate during operation and hydrogen peroxide during overhaul.
- Pressurized water reactor /
- Primary zinc injection /
- Dosing equipment

HTML全文

图 1 注锌加药设备流程图

①—溶液箱；②—加锌泵；③—加双氧水泵；DN4—球阀半径为4 mm，其他同理　　　　　

Figure 1. Flow Chart of Zinc Injection and Dosing Equipment

下载: 全尺寸图片幻灯片

参考文献(12)

[1]	王力. 加锌对一回路材料氧化膜结构影响及其机理研究[D]. 上海: 上海交通大学,2012.
[2]	姜苏青. 注锌对压水堆核电站一回路结构材料腐蚀行为影响的研究[D]. 上海: 上海交通大学,2012.
[3]	DESHON J. Pressurized water reactor fuel impact assessment for injecting zinc at a high-duty PWR: Callaway[R]. Palo Alto: EPRI, 2003.
[4]	HAAS C, REID R. Pressurized water reactor primary zinc application sourcebook, revision 1[Z]. USA: EPRI, 2012.
[5]	FRATTINI P, FRUZZETTI K. Overcoming solubility limitations to zinc addition in pressurized water reactors[Z]. Palo Alto, USA: EPRI, 2001.
[6]	FRUZZETTI K. Overview report on zinc addition in pressurized water reactors-2004: 1009568[R]. Palo Alto: EPRI, 2004.
[7]	廖家鹏,毛玉龙,阮天鸣,等. 注锌对燃料包壳表面污垢沉积及硼析出的影响研究[J]. 核技术,2023, 46(3): 030603. doi: 10.11889/j.0253-3219.2023.hjs.46.030603
[8]	GOLD R E, KORMUTH J W, BERGMANN C A, et al. Evaluation of zinc addition to the primary coolant of PWRs[Z]. USA: EPRI, 1996.
[9]	GOLD R E, KORMUTH J W, BERGMANN C A, et al. Evaluation of zinc addition on fuel cladding at the Halden test reactor[Z]. USA: EPRI, 1996.
[10]	GOLD R E, KORMUTH J W. Evaluation of zinc addition to the primary coolant of PWRs: fuel cladding corrosion[Z]. USA: EPRI, 1996.
[11]	BYERS W A, WANG G. WALT loop crud thermal conductivity/zinc project update[C]. Tucson AZ: EPRI Fuel Reliability Program PWR Fuel Corrosion and Crud Winter Meeting, 2012.
[12]	MORITA S. Demonstration of zinc injection technique in Fugen nuclear power station[C]. Japan: 2005 ISOE Asian ALARA Symposium, 2005.