Extension and Validation of RELAP/SCDAPSIM/MOD4.0 Code on FHR

Jiang Shuying; Cheng Maosong; Dai Zhimin; Chen Yushuang

doi:10.13832/j.jnpe.2016.06.0033

Volume 37 Issue 6

Feb. 2025

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2016 > 37(6): 33-36

Jiang Shuying, Cheng Maosong, Dai Zhimin, Chen Yushuang. Extension and Validation of RELAP/SCDAPSIM/MOD4.0 Code on FHR[J]. Nuclear Power Engineering, 2016, 37(6): 33-36. doi: 10.13832/j.jnpe.2016.06.0033

Citation:

Jiang Shuying, Cheng Maosong, Dai Zhimin, Chen Yushuang. Extension and Validation of RELAP/SCDAPSIM/MOD4.0 Code on FHR[J]. Nuclear Power Engineering, 2016, 37(6): 33-36. doi: 10.13832/j.jnpe.2016.06.0033

Citation:

PDF( 1083 KB)

Extension and Validation of RELAP/SCDAPSIM/MOD4.0 Code on FHR

doi: 10.13832/j.jnpe.2016.06.0033

1. Shanghai Institute of Applied Physics, Chinese Academy of Science, Shanghai, 201800, China;
2. University of Chinese Academy of Sciences, Beijing, 100049, China

Received Date: 2016-01-21
Rev Recd Date: 2016-10-15

Available Online: 2025-02-15

Abstract

Abstract

On the basis of RELAP/SCDAPSIM/MOD4.0 code, adding and implementing the thermophysical properties and heat transfer coefficients of FLi Na K into the source code, the RELAP5-FHR code is developed, which is suitable for the analyzing of the FHR system. Then the RELAP5-FHR code is validated by the experimental data of the FLi Na K high temperature molten salt test loop. The results indicate that the simulation results from the RELAP5-FHR code are in close agreement with the experimental data, which validates the applicability of RELAP5-FHR code for FHR.
- RELAP/SCDAPSIM/MOD4.0,
- FHR,
- FLiNaK Test Loop,
- Code Validation