Development of Dry Circular Mechanical Cutting Device

Hu Dongmei; Peng Jing; Zhang Bin; Liu Xiaoqiong

doi:10.13832/j.jnpe.2018.06.0092

Volume 39 Issue 6

Dec. 2018

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2018 > 39(6): 92-95

Hu Dongmei, Peng Jing, Zhang Bin, Liu Xiaoqiong. Development of Dry Circular Mechanical Cutting Device[J]. Nuclear Power Engineering, 2018, 39(6): 92-95. doi: 10.13832/j.jnpe.2018.06.0092

Citation:

Hu Dongmei, Peng Jing, Zhang Bin, Liu Xiaoqiong. Development of Dry Circular Mechanical Cutting Device[J]. Nuclear Power Engineering, 2018, 39(6): 92-95. doi: 10.13832/j.jnpe.2018.06.0092

Hu Dongmei, Peng Jing, Zhang Bin, Liu Xiaoqiong. Development of Dry Circular Mechanical Cutting Device[J]. Nuclear Power Engineering, 2018, 39(6): 92-95. doi: 10.13832/j.jnpe.2018.06.0092

Citation:

Hu Dongmei, Peng Jing, Zhang Bin, Liu Xiaoqiong. Development of Dry Circular Mechanical Cutting Device[J]. Nuclear Power Engineering, 2018, 39(6): 92-95. doi: 10.13832/j.jnpe.2018.06.0092

PDF( 0 KB)

Development of Dry Circular Mechanical Cutting Device

doi: 10.13832/j.jnpe.2018.06.0092

Publish Date: 2018-12-15

Abstract

Abstract

The spent fuel that encapsulated in the spent fuel storage canister shall be withdrawn in its reprocessing. Based on the circumstance of hot cell and the structure characteristics of spent fuel storage canister, as the radiation resistant design, the fixation of the storage canister, cutting feed, turning tool and its replacement, and rad-waste minimization shall be considered in the design. A dry circular mechanical cutting device is developed to open the spent fuel storage canister in the hot cell. Function tests verify that the cutting device meets the requirements of its design and application.
- Spent fuel,
- Storage canister,
- Mechanical cutting,
- Circular cutting,
- Dry cutting