Estimation of Inner Wall Temperature in a Two-Dimensional Pipeline for Inverse Heat Conduction Problem Based on Green’s Function

Li Juan; Yin Haifeng

doi:10.13832/j.jnpe.2021.04.0166

Volume 42 Issue 4

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2021 > 42(4): 166-170

Li Juan, Yin Haifeng. Estimation of Inner Wall Temperature in a Two-Dimensional Pipeline for Inverse Heat Conduction Problem Based on Green’s Function[J]. Nuclear Power Engineering, 2021, 42(4): 166-170. doi: 10.13832/j.jnpe.2021.04.0166

Citation:

Li Juan, Yin Haifeng. Estimation of Inner Wall Temperature in a Two-Dimensional Pipeline for Inverse Heat Conduction Problem Based on Green’s Function[J]. Nuclear Power Engineering, 2021, 42(4): 166-170. doi: 10.13832/j.jnpe.2021.04.0166

Citation:

PDF( 4981 KB)

Estimation of Inner Wall Temperature in a Two-Dimensional Pipeline for Inverse Heat Conduction Problem Based on Green’s Function

doi: 10.13832/j.jnpe.2021.04.0166

Shanghai Nuclear Engineering Research & Design Institute Co., Ltd., Shanghai, 200233, China

Received Date: 2020-05-11
Rev Recd Date: 2020-12-21
Publish Date: 2021-08-15

Abstract

Abstract

It is not allowed to install the temperature sensor through the opening pore in the pipe to measure the inner wall temperature for some pipe systems in nuclear power plants, and thus it is necessary to find an indirect and non-destructive method to obtain the inner wall temperature fluctuations. The inverse heat conduction problem is analyzed based on Green’s function to achieve the inner wall temperature according to the out wall temperature of the pipeline. It is verified by examples and compared with the conjugate gradient method. Results show that the Green’s function method can accurately catch the inner wall temperature fluctuation of the pipe and is applicable for the thicker wall pipe inverse heat conduction problem which is difficult to converge used by the conjugate gradient method. And because there is no need for iteration, the calculation efficient is much higher, which is more suitable for the fatigue monitoring calculation in nuclear power plants.
- Inverse heat conduction,
- Thermal stratification,
- Green’s function,
- Conjugate gradient method

FullText(HTML)

References(9)

References

[1]	KIM J H, ROIDT R M, DEARDORFF A F. Thermal stratification and reactor piping integrity[J]. Nuclear Engineering and Design, 1993, 139(1): 83-95. doi: 10.1016/0029-5493(93)90263-9
[2]	LING J, WANG H J, LIU L, et al. Method for measuring temperature of inner wall surface of pipeline in nuclear power plant[C]//Proceedings of 2017 25th International Conference on Nuclear Engineering. Shanghai, China: ASME, 2017.
[3]	ÖZISIK M N, ORLANDE H R B. Inverse heat transfer: fundamentals and applications[M]. New York: Taylor & Francis, 2000: 58-66.
[4]	朱丽娜,王广军,陈红. 采用共轭梯度法求解多变量稳态传热反问题[J]. 中国电机工程学报,2011, 31(8): 58-61.
[5]	LU T, LIU B, JIANG P X, et al. A two-dimensional inverse heat conduction problem in estimating the fluid temperature in a pipeline[J]. Applied Thermal Engineering, 2010, 30(13): 1574-1579. doi: 10.1016/j.applthermaleng.2010.03.011
[6]	LU T, LIU B, JIANG P X. Inverse estimation of the inner wall temperature fluctuations in a pipe elbow[J]. Applied Thermal Engineering, 2011, 31(11-12): 1976-1982. doi: 10.1016/j.applthermaleng.2011.03.002
[7]	KANG S Y, KIM G K, KIM H M, et al. A methodology to evaluate stress in surge line from outer surface temperature for fatigue assessment[C]//Proceedings of the 23rd International Conference Nuclear Energy for New Europe. Portorož, Slovenia, 2014.
[8]	HSU P T, YANG Y T, CHEN C K. Simultaneously estimating the initial and boundary conditions in a two-dimensional hollow cylinder[J]. International Journal of Heat and Mass Transfer, 1998, 41(1): 219-227. doi: 10.1016/S0017-9310(97)00095-1
[9]	陈蓉,刘新,章贵和. 快速疲劳分析方法在核电厂疲劳监测系统中的应用[J]. 核动力工程,2018, 39(6): 59-63.