Citation: | Yang Yun, Xu Qiwei, Zhao Yizhou, Fu Guozhong, Tang Jiankai. Analysis of Mixed Equivalent Magnetic Network Model of Reactor Control Rod Drive Mechanism Considering Magnetic Saturation[J]. Nuclear Power Engineering, 2023, 44(S2): 146-152. doi: 10.13832/j.jnpe.2023.S2.0146 |
[1] |
INDRAKOESOEMA K, HANDONO K, AWWALUDDIN M, et al. Mechanical and electrical analysis on RDE control rod[J]. Journal of Engineering Science and Technology, 2020, 15(2): 957-966.
|
[2] |
朱齐荣,朱京昌. 控制棒驱动机构的电磁设计计算[J]. 核动力工程,1991, 12(3): 35-40.
|
[3] |
沈小要. 控制棒驱动机构动态提升特性研究[J]. 核动力工程,2012, 33(1): 51-55.
|
[4] |
PARK B J, PHAM P T, HONG K S. Model reference robust adaptive control of control element drive mechanism in a nuclear power plant[J]. International Journal of Control, Automation and Systems, 2020, 18(7): 1651-1661. doi: 10.1007/s12555-019-0987-3
|
[5] |
ZHU Z Y, ZHU H L, LI X Y, et al. Dynamic equivalent magnetic network analysis of an axial pm bearingless flywheel machine[J]. IEEE Access, 2021, 9: 32425-32435. doi: 10.1109/ACCESS.2021.3060921
|
[6] |
HOU J N, GENG W W, LI Q, et al. 3-D equivalent magnetic network modeling and FEA verification of a novel axial-flux hybrid-excitation in-wheel motor[J]. IEEE Transactions on Magnetics, 2021, 57(7): 8106912.
|
[7] |
张知竹,刘志明,李海博,等. 磁力提升型控制棒驱动机构电磁场仿真分析[J]. 机械设计与制造工程,2019, 48(12): 33-37. doi: 10.3969/j.issn.2095-509X.2019.12.008
|
[8] |
邓强,陈西南,刘佳,等. 磁力提升型控制棒驱动机构提升动作过程动力学分析[J]. 机械设计与制造工程,2017, 46(4): 106-110.
|
[9] |
SUN H B, LI W Q, YU T D, et al. Research on associated motion simulation method and platform of control rod driving mechanism[J]. Advances in Mechanical Engineering, 2021, 13(9): 168781402110430.
|
[10] |
FORSTNER G, KUGI A, KEMMETMULLER W. A magnetic equivalent circuit based modeling framework for electric motors applied to a PMSM with winding short circuit[J]. IEEE Transactions on Power Electronics, 2020, 35(11): 12285-12295. doi: 10.1109/TPEL.2020.2986042
|
[11] |
ZHU Y, LIU G H, XU L, et al. A hybrid analytical model for permanent magnet vernier machines considering saturation effect[J]. IEEE Transactions on Industrial Electronics, 2022, 69(2): 1211-1223. doi: 10.1109/TIE.2021.3060656
|
[12] |
SIM J H, AHN D G, KIM D Y, et al. Three-dimensional equivalent magnetic circuit network method for precise and fast analysis of PM-assisted claw-pole synchronous motor[J]. IEEE Transactions on Industry Applications, 2018, 54(1): 160-171. doi: 10.1109/TIA.2017.2749312
|
[13] |
LIU G H, WANG Y, CHEN Q, et al. Design and analysis of a new equivalent magnetic network model for IPM machines[J]. IEEE Transactions on Magnetics, 2020, 56(6): 8101112.
|
[14] |
CAO D H, ZHAO W X, JI J H, et al. A generalized equivalent magnetic network modeling method for vehicular dual-permanent-magnet vernier machines[J]. IEEE Transactions on Energy Conversion, 2019, 34(4): 1950-1962. doi: 10.1109/TEC.2019.2921699
|
[15] |
DING L, LIU G H, CHEN Q, et al. A novel mesh-based equivalent magnetic network for performance analysis and optimal design of permanent magnet machines[J]. IEEE Transactions on Energy Conversion, 2019, 34(3): 1337-1346. doi: 10.1109/TEC.2019.2900263
|
[16] |
LIU G H, DING L, ZHAO W X, et al. Nonlinear equivalent magnetic network of a linear permanent magnet vernier machine with end effect consideration[J]. IEEE Transactions on Magnetics, 2018, 54(1): 8100209.
|
[17] |
许艳涛,祖洪彪. 控制棒驱动机构步跃动作运动分析[J]. 核技术,2013, 36(4): 040666.
|
[18] |
CAO D H, ZHAO W X, JI J H, et al. Parametric equivalent magnetic network modeling approach for multiobjective optimization of pm machine[J]. IEEE Transactions on Industrial Electronics, 2021, 68(8): 6619-6629. doi: 10.1109/TIE.2020.3005105
|
[19] |
官瑞杨,魏新劳,王永红,等. 铁心电抗器气隙边缘效应计算及影响因素[J]. 电机与控制学报,2018, 22(4): 81-88. doi: 10.15938/j.emc.2018.04.011
|
[20] |
郭凤仪,王智勇. 电器基础理论[M]. 北京: 机械工业出版社,2020: 190-192.
|