Safety Management Strategies and Practices for Multi-Unit Group Operation at Tianwan Nuclear Power Plant

Yao Gang

doi:10.13832/j.jnpe.2024.05.0206

Volume 45 Issue 5

Oct. 2024

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2024 > 45(5): 206-212

Yao Gang. Safety Management Strategies and Practices for Multi-Unit Group Operation at Tianwan Nuclear Power Plant[J]. Nuclear Power Engineering, 2024, 45(5): 206-212. doi: 10.13832/j.jnpe.2024.05.0206

Citation:

Yao Gang. Safety Management Strategies and Practices for Multi-Unit Group Operation at Tianwan Nuclear Power Plant[J]. Nuclear Power Engineering, 2024, 45(5): 206-212. doi: 10.13832/j.jnpe.2024.05.0206

Citation:

PDF( 3270 KB)

Safety Management Strategies and Practices for Multi-Unit Group Operation at Tianwan Nuclear Power Plant

doi: 10.13832/j.jnpe.2024.05.0206

Yao Gang

Nuclear Power Institute of China, Chengdu, 610213, China

Received Date: 2024-08-12
Rev Recd Date: 2024-08-24
Publish Date: 2024-10-14

Abstract

Abstract

At present, the nuclear power units in operation and under construction in Tianwan Nuclear Power Plant (TNPP) include three different types of units, namely, VVER-1000 (Units 1-4), M310 (Units 5 and 6) and VVER-1200 (Units 7 and 8), covering a variety of nuclear power design technical directions. Under the multi-unit group operation mode, TNPP has carried out research on the optimization of operatng safety management strategy based on the design characteristics of different units, and established a unified Symptom-oriented Emergency Operating Procedure (SEOP) system for nuclear power units, which has the characteristics of accurate and rapid Event-oriented Procedure (EOP) and wide coverage of State-oriented Emergency Operating Procedure (SOP). At the same time, the technical framework of the new version of Severe Accident Management Guideline (SAMG) implemented by Units 7 and 8 contains more comprehensive ability to deal with serious accidents and simpler diagnostic guidelines, which can effectively alleviate the consequences of serious accidents in nuclear power plants. The new SAMG technical framework can also be applied to other units of TNPP.

FullText(HTML)

References(16)

References

[1]	蒋国元. WWER-1000核电站设备与系统[M]. 北京: 原子能出版社,2009.
[2]	国家核安全局. 福岛核事故后核电厂改进行动通用技术要求(试行)[EB/OL]. (2012-06-12)[2024-07-15]. https://www.mee.gov.cn/gkml/sthjbgw/haq/201206/t20120615_231698.htm.
[3]	李石. VVER-1200设计优化分析[J]. 电工技术,2021(12): 39-40.
[4]	国家核安全局. 核动力厂设计安全规定: HAF 102-2016[S]. 国家核安全局,2016: 2-8.
[5]	张卫峰,惠俊军. 智能故障诊断技术的现状及展望[J]. 工业仪表与自动化装置,2017(5): 21-24.
[6]	IAEA, Safety of nuclear power plants: Design: SSR-2/1[R].Vienna: IAEA, 2015.
[7]	梅亮,罗宏. 核电站SOP事故规程原理[J]. 科技视界,2013(34): 361.
[8]	吴广君,刘玉华,刘志云. 状态导向法事故规程在我国核电厂中的应用[J]. 能源工程,2011(1): 21-24.
[9]	冉旭,方红宇. 状态导向规程引导下的蒸汽发生器给水流量完全丧失事故分析研究[J]. 核动力工程,2010, 31(S1): 8-10.
[10]	刘立欣,王喆. 核电厂SGTR规程优化研究[J]. 核动力工程,2022, 43(4): 126-130.
[11]	Westinghouse, Westinghouse owners group generic severe accident management guidelines, Revision 0, 1994 and Revision 1[Z]. 2001.
[12]	FELIX E, DESSARS N. Severe accident management development program for VVER-1000 and VVER-440/213 based on the Westinghouse Owners Group approach[C]//Proceedings of the International Conference Nuclear Energy for New Europe 2003. Portorož, Slovenia: IAEA, 2003.
[13]	FELIX E, DESSARS N. Dukovany nuclear power plants severe accident management guidelines, diagnostics and instrumentation report: WENX-01-0032[R]. Portorož, Slovenia, 2003.
[14]	DESSARS N, VAN HAESENDONCK M. Temelin nuclear power plant severe accident management guidelines, diagnostics and instrumentation report: WENX 01-0021[Z]. 2002.
[15]	IGNATOV V, MIKHALCHUK A, KABANOV L, et al. Development of severe accident management guidance for VVER-1000 plants: NEA-CSNI-R-2001-20[Z]. NEA, 2001.
[16]	MATEJOVIČ P, BACHRATÝ M, VRANKA Ľ. Feasibility of in-vessel retention of corium for VVER 440/V213 Units, Part III, prepared by IVS Trnava for Paks NPP in the frame of VERSAFE[Z]. 2002.