Citation: | Wang Yuhui, Liu Chao, Hu Yong, Peng Dequan. Effect of pH on High-temperature Electrochemical Corrosion Behavior of AlCrNbSiTi High Entropy Alloy Coatings on Zr-Sn-Nb Alloy[J]. Nuclear Power Engineering, 2024, 45(S1): 123-129. doi: 10.13832/j.jnpe.2024.S1.0123 |
[1] |
ZHANG W, WANG M, WANG L, et al. Interface stability, mechanical and corrosion properties of AlCrMoNbZr/(AlCrMoNbZr)N high-entropy alloy multilayer coatings under helium ion irradiation[J]. Applied Surface Science, 2019, 485: 108-118. doi: 10.1016/j.apsusc.2019.04.192
|
[2] |
CHEN J, ZHOU X Y, WANG W L, et al. A review on fundamental of high entropy alloys with promising high–temperature properties[J]. Journal of Alloys and Compounds, 2018, 760: 15-30. doi: 10.1016/j.jallcom.2018.05.067
|
[3] |
ZOU Y, WHEELER J M, MA H, et al. Nanocrystalline high-entropy alloys: a new paradigm in high-temperature strength and stability[J]. Nano Letters, 2017, 17(3): 1569-1574. doi: 10.1021/acs.nanolett.6b04716
|
[4] |
ZHANG W, TANG R, YANG Z B, et al. Preparation, structure, and properties of an AlCrMoNbZr high-entropy alloy coating for accident-tolerant fuel cladding[J]. Surface and Coatings Technology, 2018, 347: 13-19. doi: 10.1016/j.surfcoat.2018.04.037
|
[5] |
XIA S Q, YANG X, YANG T F, et al. Irradiation resistance in Al xCoCrFeNi high entropy alloys[J]. JOM, 2015, 67(10): 2340-2344. doi: 10.1007/s11837-015-1568-4
|
[6] |
GARBETT K, MANTELL M A. Corrosion product behaviour during hot functional tests and normal operation in cycle 1 at Sizewell B[C]//Proceedings of the Conference Organized. Bournemouth: British Nuclear Energy Society, 1996: 443-450.
|
[7] |
MONTEMOR M F, FERREIRA M G S, WALLS M, et al. Influence of pH on properties of oxide films formed on type 316L stainless steel, Alloy 600, and Alloy 690 in high-temperature aqueous environments[J]. Corrosion, 2003, 59(1): 11-21. doi: 10.5006/1.3277531
|
[8] |
ÁLVAREZ P, COLLAZO A, COVELO A, et al. The electrochemical behaviour of sol–gel hybrid coatings applied on AA2024-T3 Alloy: effect of the metallic surface treatment[J]. Progress in Organic Coatings, 2010, 69(2): 175-183. doi: 10.1016/j.porgcoat.2010.04.005
|
[9] |
WESSELMANN C. Water in nuclear power plants with light-water reactors part 1: pressurised-water reactors. Part 2: boiling-water reactors[J]. VGB PowerTech, 2021, 101(3): 101.
|
[10] |
BETOVA I, BOJINOV M, KARASTOYANOV V, et al. Effect of water chemistry on the oxide film on Alloy 690 during simulated hot functional testing of a pressurised water reactor[J]. Corrosion Science, 2012, 58: 20-32. doi: 10.1016/j.corsci.2012.01.002
|
[11] |
陈峰,刘国辉,林巧力,等. 347不锈钢表面堆焊690镍基合金电化学腐蚀性能研究[J]. 动力工程学报,2016, 36(4): 326-330. doi: 10.3969/j.issn.1674-7607.2016.04.012
|
[12] |
XIA D H, ZHU R K, BEHNAMIAN Y, et al. pH Effect on sulfur-induced passivity degradation of Alloy 800 in simulated crevice chemistries[J]. Journal of the Electrochemical Society, 2014, 161(4): C201-C214. doi: 10.1149/2.063404jes
|
[13] |
吴开源,王勇,赵卫民. 金属结构的腐蚀与防护[M]. 东营: 石油大学出版社,2000: 58-61.
|
[14] |
YE Q F, FENG K, LI Z G, et al. Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating[J]. Applied Surface Science, 2017, 396: 1420-1426. doi: 10.1016/j.apsusc.2016.11.176
|
[15] |
LI Q H, YUE T M, GUO Z N, et al. Microstructure and corrosion properties of AlCoCrFeNi high entropy alloy coatings deposited on AISI 1045 steel by the electrospark process[J]. Metallurgical and Materials Transactions A, 2013, 44(4): 1767-1778. doi: 10.1007/s11661-012-1535-4
|