Development and Preliminary Verification of OpenMC-PARCS Two-step Criticality and Burnup Calculation Model for Fast Reactors

Hu Henglin; Zhang Guangchun; Xiao Peng; Xia Bangyang; Wang Lianjie

doi:10.13832/j.jnpe.2025.S1.0250

Volume 46 Issue S1

Jul. 2025

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2025 > 46(S1): 250-259

Hu Henglin, Zhang Guangchun, Xiao Peng, Xia Bangyang, Wang Lianjie. Development and Preliminary Verification of OpenMC-PARCS Two-step Criticality and Burnup Calculation Model for Fast Reactors[J]. Nuclear Power Engineering, 2025, 46(S1): 250-259. doi: 10.13832/j.jnpe.2025.S1.0250

Citation:

Hu Henglin, Zhang Guangchun, Xiao Peng, Xia Bangyang, Wang Lianjie. Development and Preliminary Verification of OpenMC-PARCS Two-step Criticality and Burnup Calculation Model for Fast Reactors[J]. Nuclear Power Engineering, 2025, 46(S1): 250-259. doi: 10.13832/j.jnpe.2025.S1.0250

Citation:

Hu Henglin, Zhang Guangchun, Xiao Peng, Xia Bangyang, Wang Lianjie. Development and Preliminary Verification of OpenMC-PARCS Two-step Criticality and Burnup Calculation Model for Fast Reactors[J]. Nuclear Power Engineering, 2025, 46(S1): 250-259. doi: 10.13832/j.jnpe.2025.S1.0250

PDF( 24928 KB)

Development and Preliminary Verification of OpenMC-PARCS Two-step Criticality and Burnup Calculation Model for Fast Reactors

doi: 10.13832/j.jnpe.2025.S1.0250

1.
School of Energy Science and Engineering, Harbin Institute of Technology, Harbin, 150001, China
2.
National Key Laboratory of Nuclear Reactor Technology, Nuclear Power Institute of China, Chengdu, 610213, China

Received Date: 2025-01-15
Rev Recd Date: 2025-04-12
Publish Date: 2025-06-15

Abstract

Abstract

Fast reactors cannot directly use PWR calculation models for neutronics analysis due to their hard spectra and complex resonance phenomena. Monte Carlo (MC) method utilizes continuous-energy neutron cross-sections, which can accurately simulate resonance interference phenomena in fast reactors, yielding highly precise homogenized few-group cross-sections. This paper, based on MC method and the Triangle-based Polynomial Expansion Nodal (TPEN) method, investigates an OpenMC-PARCS two-step method of criticality and burnup calculation for fast reactors. Based on the OpenMC one-step method calculation results, a preliminary validation of the assumed constant microscopic cross-section burnup calculation scheme is conducted using the sodium-cooled fast reactor benchmark problem MET-1000. In the initial steady-state calculation, the deviation of the core effective multiplication factor (k_eff) using the OpenMC-PARCS two-step method is −104pcm (1pcm=10⁻⁵), and the deviation in the radial power distribution is no greater than 1%. During burnup calculations, the maximum deviation of the core k_eff from the reference solution is 591.2pcm, while most major nuclide number density deviation is no greater than 1%. The preliminary validation results indicate that the OpenMC-PARCS two-step method model can be used for large metallic fast reactor core design and fuel management.
- Sodium-cooled fast reactor,
- Monte Carlo method,
- Triangle-based Polynomial Expansion Nodal (TPEN) method,
- Two-step method,
- Burnup calculation

FullText(HTML)

References(9)

References

[1]	吴宏春,杨红义,郑友琦,等. 快中子反应堆堆芯物理分析方法的研究现状与发展建议[J]. 原子能科学技术,2024, 58(3): 513-527. doi: 10.7538/yzk.2024.youxian.0040
[2]	FRIDMAN E, SHWAGERAUS E. Modeling of SFR cores with Serpent–DYN3D codes sequence[J]. Annals of Nuclear Energy, 2013, 53: 354-363. doi: 10.1016/j.anucene.2012.08.006
[3]	NIKITIN E, FRIDMAN E, MIKITYUK K. Solution of the OECD/NEA neutronic SFR benchmark with Serpent-DYN3D and Serpent-PARCS code systems[J]. Annals of Nuclear Energy, 2015, 75: 492-497. doi: 10.1016/j.anucene.2014.08.054
[4]	GHASABYAN L K. Use of Serpent Monte-Carlo code for development of 3D full-core models of Gen-IV fast-spectrum reactors and preparation of group constants for transiet analyses with PARCS/TRACE coupled system[D]. Stockholm: Royal Institute of Technology, 2013.
[5]	NGUYEN T D C, LEE H, LEE D. Use of Monte Carlo code MCS for multigroup cross section generation for fast reactor analysis[J]. Nuclear Engineering and Technology, 2021, 53(9): 2788-2802. doi: 10.1016/j.net.2021.03.005
[6]	RACHAMIN R, WEMPLE C, FRIDMAN E. Neutronic analysis of SFR core with HELIOS-2, Serpent, and DYN3D codes[J]. Annals of Nuclear Energy, 2013, 55: 194-204. doi: 10.1016/j.anucene.2012.11.030
[7]	ALIBERTI G, PALMIOTTI G, SALVATORES M, et al. Methodologies for treatment of spectral effects at core-reflector interfaces in fast neutron systems[C]//Proceedings of the PHYSOR 2004: The Physics of Fuel Cycles and Advanced Nuclear Systems: Global Developments. Chicago: American Nuclear Society, 2004.
[8]	BERNNAT W, BLANCHET D, BRUN E, et al. Benchmark for neutronic analysis of sodium-cooled fast reactor cores with various fuel types and core sizes: NEA/NSC/R(2015)9[R]. France: OECO/NEA, 2016.
[9]	KIM K S. Specification for the VERA depletion benchmark suite: ORNL/TM-2016/53[R]. Oak Ridge: Oak Ridge National Laboratory, 2015: 53.