Combination Test for PLC Embedded Software in Reactor Control and Protection System

SUN Kai; GONG Jianjun; KANG Jia; CHEN Peijun; DENG Jiangming; FENG Liang; LI Yuanwen; ZHU Xiaoyong; PU Yuruo

Volume 33 Issue 1

Mar. 2025

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Nuclear Power Engineering > 2012 > 33(1): 56-59,77

SUN Kai, GONG Jianjun, KANG Jia, CHEN Peijun, DENG Jiangming, FENG Liang, LI Yuanwen, ZHU Xiaoyong, PU Yuruo. Combination Test for PLC Embedded Software in Reactor Control and Protection System[J]. Nuclear Power Engineering, 2012, 33(1): 56-59,77.

Citation:

PDF( 486 KB)

Combination Test for PLC Embedded Software in Reactor Control and Protection System

Nuclear Power Institute of China, Chengdu, 610041, China

Received Date: 2011-03-10
Rev Recd Date: 2011-04-20

Available Online: 2025-03-08

Abstract

Abstract

The manual static test method and the dynamic simulation test method are combined to test the embedded software in the reactor control and protection system,which is called combination test for short.There are two steps for the combination test.Firstly,the manual static test method is used to verify the safety and rationality of PLC（programmable logic controller）,and then the dynamic simulation test method is used to verify its functional effectiveness.This combination test can be conducted with PC and the development and simulation tools for the software to be tested.The effectiveness of the combination test is verified by the hardware test method in the actual PLC operation environment.The result shows that the combination test is effective and is more efficient than the hardware test method.
- Reactor control and protective system,
- Embedded software,
- Software test

FullText(HTML)

References(0)

References

Relative Articles

[1]	Liu Kun, Zhao Wenbo, Gong Zhaohu, Chen Zhang, Chai Xiaoming, Zhang Bin, Fang Chao, Zeng Wei. Numerical Verification of SP₃ Based Computational Physics Code for Rod-type PWRs[J]. Nuclear Power Engineering, 2024, 45(S2): 49-54. doi: 10.13832/j.jnpe.2024.S2.0049
[2]	Deng Jian, Wei Zonglan, Zeng Wei, Li Songwei, Qiu Zhifang, Liu Luguo. Development and Application of Autonomous Computational Fluid Dynamics Code WINGS-CFD for Nuclear Reactors[J]. Nuclear Power Engineering, 2024, 45(S2): 63-69. doi: 10.13832/j.jnpe.2024.S2.0063
[3]	Cheng Yixuan, Meng Zhaocan, Zhang Hao, Zhang Yilin, Zhao Meng, Yang Yanhua. Study on Adaptability of Heat Transfer Model and Oxidation Relationships Based on COSINE Sub-channel Code[J]. Nuclear Power Engineering, 2024, 45(4): 127-133. doi: 10.13832/j.jnpe.2024.04.0127
[4]	Cheng Yangjie, Qin Fan, Xu Yonghong, He Xiaopeng, Dai Kailei, Li Lu, Zheng Xiao. Realization of Modbus/TCP Protocol Library Functions Across Embedded Platforms[J]. Nuclear Power Engineering, 2022, 43(4): 136-142. doi: 10.13832/j.jnpe.2022.04.0136
[5]	Peng Lianghui, Tang Chuntao, Yang Weiyan. Development of Advanced Neutronics Code SCAP-N for Reactor Core High Fidelity Simulation[J]. Nuclear Power Engineering, 2021, 42(2): 213-218. doi: 10.13832/j.jnpe.2021.02.0213
[6]	An Ping, Ma Yongqiang, Guo Fengchen, Sun Wei, Lu Wei, Liu Dong, Li Qing. Development and Validation of Critical Boron Concentration and Burnup Calculation of Software CORCA-3D[J]. Nuclear Power Engineering, 2019, 40(4): 161-165.
[7]	Tang Huapeng, Liu Yu, Chen Xi, Huang Huijian, Shen Caifen, Li Song. Hydraulic Analysis for HPR1000 Reactor with PHYCA Program[J]. Nuclear Power Engineering, 2019, 40(2): 23-26. doi: 10.13832/j.jnpe.2019.02.0023
[8]	Liu Ying, Feng Bo, Cao Guohai, Tang Lei, Feng Jintao, Lu Jiachuan, Yu Yang, Zhou Yueshan, Qiang Shenglong. Development of Nuclear Reactor Design Software Verification Database System[J]. Nuclear Power Engineering, 2019, 40(1): 135-139. doi: 10.13832/j.jnpe.2019.01.0135
[9]	Xu Yong, Hu Wenyong, Wang Yan, Lin Yan, You Bing. Research of Test Scenario of T2 Response Time of Reactor Protection System[J]. Nuclear Power Engineering, 2017, 38(4): 116-119. doi: 10.13832/j.jnpe.2017.04.0116
[10]	Dong Chenpeng, Leng Shan, Cheng Junjie. Design of Alarm Software for NPP Virtual Control System[J]. Nuclear Power Engineering, 2015, 36(5): 161-164. doi: 10.13832/j.jnpe.2015.05.0161
[11]	Zhuang Kun, Cao Liangzhi, ZhenG Youqi, Wu Hongchun. Development of Neutron Kinetic Code for Molten Salt Reactors[J]. Nuclear Power Engineering, 2014, 35(S2): 183-185. doi: 10.13832/j.jnpe.2014.S2.0183
[12]	Wang Tao, Jiang Xiaofeng, Lyu Dong, Chen Guohua, Huang Yong, Zhang Shaohong. Validation of Core Analysis System ORIENT 1.0[J]. Nuclear Power Engineering, 2014, 35(S2): 102-104. doi: 10.13832/j.jnpe.2014.S2.0102
[13]	Li Pengzhou, Qiao Hongwei, Sun Lei. Key Code R＆D of LBB Design for Pipeline in Reactors[J]. Nuclear Power Engineering, 2014, 35(6): 57-60. doi: 10.13832/j.jnpe.2014.06.0057
[14]	Wang Chao, Leng Shan, Chang Qing, Chen Weihua, Jiang Hui, Sun Wei, Guo Zhiwu. Accessorial Software for Reliability Analysis of Reactor Protection System[J]. Nuclear Power Engineering, 2014, 35(6): 148-152. doi: 10.13832/j.jnpe.2014.06.0148
[15]	WU Zhiqiang, LIU Chaohui, HE Li, YANG Yang, MA Quan. Security Policies for Design of Reactor Instrument ＆Control System[J]. Nuclear Power Engineering, 2013, 34(S1): 175-178.
[16]	ZU Tie-jun, WU Hong-chun, ZHENG You-qi, CAO Liang-zhi. Neutronics Analysis Code System for Hybrid Reactor[J]. Nuclear Power Engineering, 2013, 34(5): 12-15,36.
[17]	FENG Bo, LU Wei, FENG Jintao, FAN Jiajie, YUAN Guanghui. Design and Implementation of Nuclear Reactor Software Platform[J]. Nuclear Power Engineering, 2013, 34(S1): 77-79.
[18]	WANG Qiang, LI Guomin. Research of Test Scheme of Verification and Validation of Reactor Protection System Based on TXS Platform[J]. Nuclear Power Engineering, 2013, 34(S2): 58-61.
[19]	LENG Shan, LIU Chun, LI Shu, CHENG Junjie, ZHANG Caike. Design and Development of Virtual Machine Software for Safety Control System TXS in Nuclear Power Plants[J]. Nuclear Power Engineering, 2012, 33(2): 15-20.
[20]	WANG Jining, ZHOU Aiping, QIE Yongxue, ZHI Yuan. Analysis and Test of Respond Time of Nuclear Power Plant Digital Control System to Reactor Trip[J]. Nuclear Power Engineering, 2012, 33(2): 5-10.