Abstract: Model of porous media with internal heat source is established.The model uses water as flowing media,and the stainless steel test section is packed with steel spheres in manner of regular triangle,respectively.The armoured resistance wire is inserted inside the steel sphere.On the basis of the experimental model,many parameters of the local heat transfer characteristics including current velocity and wall temperature of steel sphere are measured.The experimental results show that the coefficient of heat transfer scarcely changes with pressure.The coefficient of heat transfer increases with the surface heat flux of steel sphere..When raising the inlet temperature of the cooling water,the coefficient of heat transfer presents the descending trend.In addition,the influence of entrance effect on heat transfer is discovered in the experiment,which is much less than the liquid flow in the light tube.After experiment data are analyzed and processed,the relation model of heat transfer on local heat transfer characteristic of porous media with internal heat source was described with a power-law-equation.The deviations between calculation and experimental values are within ±10%.