Development of Automatic Ultrasonic Inspection System for Heavy Water Reactor Feeder Pipe

He Ziang; Shang Junmin; YuanJianzhong; Wang Shicun; He Hai; Xu Kui

doi:10.13832/j.jnpe.2015.02.0081

Volume 36 Issue 2

Feb. 2025

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2015 > 36(2): 81-83

He Ziang, Shang Junmin, YuanJianzhong, Wang Shicun, He Hai, Xu Kui. Development of Automatic Ultrasonic Inspection System for Heavy Water Reactor Feeder Pipe[J]. Nuclear Power Engineering, 2015, 36(2): 81-83. doi: 10.13832/j.jnpe.2015.02.0081

Citation:

He Ziang, Shang Junmin, YuanJianzhong, Wang Shicun, He Hai, Xu Kui. Development of Automatic Ultrasonic Inspection System for Heavy Water Reactor Feeder Pipe[J]. Nuclear Power Engineering, 2015, 36(2): 81-83. doi: 10.13832/j.jnpe.2015.02.0081

Citation:

PDF( 421 KB)

Development of Automatic Ultrasonic Inspection System for Heavy Water Reactor Feeder Pipe

doi: 10.13832/j.jnpe.2015.02.0081

1. Nuclear Power Institute of China, Chengdu, 610041, China;
2. CNNP Nuclear Power Operations Management Co. Ltd., Haiyan, Zhejiang, 314300, China;
3. China Nuclear Power Operation Technology Co. Ltd., Wuhan, 430223, China

Received Date: 2014-04-01
Rev Recd Date: 2015-01-24

Available Online: 2025-02-15

Abstract

Abstract

A set of automatic ultrasonic inspection system for CANDU PHWR Feeder pipe is developed. The phased array ultrasonic inspection function is achieved using the normal ultrasonic probe. This system can carry out the automatic data acquire on site, and remotely conduct the real time data analysis, with the inspection accuracy ±0.03 mm. A set of auxiliary shield equipment is also developed, which shield rate is up to 80%.
- Heavy water reactor,
- Feeder pipe,
- Ultrasonic inspection,
- Shield equipment