Thermal Optimization and Design for Irradiation Rig of Multi-Fuel Assembly

Xu Taozhong; Xiang Yuxin; Wang Hao; DenG Caiyu; Liu Shuiqing; Sun Shouhua

doi:10.13832/j.jnpe.2017.04.0076

Volume 38 Issue 4

Feb. 2025

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2017 > 38(4): 76-78

Xu Taozhong, Xiang Yuxin, Wang Hao, DenG Caiyu, Liu Shuiqing, Sun Shouhua. Thermal Optimization and Design for Irradiation Rig of Multi-Fuel Assembly[J]. Nuclear Power Engineering, 2017, 38(4): 76-78. doi: 10.13832/j.jnpe.2017.04.0076

Citation:

Xu Taozhong, Xiang Yuxin, Wang Hao, DenG Caiyu, Liu Shuiqing, Sun Shouhua. Thermal Optimization and Design for Irradiation Rig of Multi-Fuel Assembly[J]. Nuclear Power Engineering, 2017, 38(4): 76-78. doi: 10.13832/j.jnpe.2017.04.0076

Citation:

PDF( 650 KB)

Thermal Optimization and Design for Irradiation Rig of Multi-Fuel Assembly

doi: 10.13832/j.jnpe.2017.04.0076

Nuclear Power Institute of China, Chengdu, 610213, China

Received Date: 2017-03-24
Rev Recd Date: 2017-05-27

Available Online: 2025-02-09

Abstract

Abstract

The numerical model of multi-fuel assembly was built up by the ANSYS/CFX code to optimize the irradiation rig of assembly, and the experiment was operated in the HFETR. The experimental data showed the measuring data could represent the real irradiation data after optimization of the multi-fuel assembly rig.
- Multi-fuel assembly,
- Numerical simulation,
- Thermocouple