Cleanness Period Estimation of MJTR Primary Heat Exchanger

Liang Guangyuan; Liu Shuiqing; Xu Taozhong

doi:10.13832/j.jnpe.2018.S2.0121

Volume 39 Issue S2

Dec. 2018

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2018 > 39(S2): 121-123

Liang Guangyuan, Liu Shuiqing, Xu Taozhong. Cleanness Period Estimation of MJTR Primary Heat Exchanger[J]. Nuclear Power Engineering, 2018, 39(S2): 121-123. doi: 10.13832/j.jnpe.2018.S2.0121

Citation:

Liang Guangyuan, Liu Shuiqing, Xu Taozhong. Cleanness Period Estimation of MJTR Primary Heat Exchanger[J]. Nuclear Power Engineering, 2018, 39(S2): 121-123. doi: 10.13832/j.jnpe.2018.S2.0121

Liang Guangyuan, Liu Shuiqing, Xu Taozhong. Cleanness Period Estimation of MJTR Primary Heat Exchanger[J]. Nuclear Power Engineering, 2018, 39(S2): 121-123. doi: 10.13832/j.jnpe.2018.S2.0121

Citation:

Liang Guangyuan, Liu Shuiqing, Xu Taozhong. Cleanness Period Estimation of MJTR Primary Heat Exchanger[J]. Nuclear Power Engineering, 2018, 39(S2): 121-123. doi: 10.13832/j.jnpe.2018.S2.0121

PDF( 379 KB)

Cleanness Period Estimation of MJTR Primary Heat Exchanger

doi: 10.13832/j.jnpe.2018.S2.0121

Nuclear Power Institute of China, Chengdu, 610213, China

Received Date: 2018-09-02
Rev Recd Date: 2018-09-18

Available Online: 2025-02-09

Abstract

Abstract

Primary heat exchanger is the main equipment of MJTR. As the heat transfer capacity is the main factor that affect the safety of the reactor operation, the heat exchanger need to be cleared after some time of operation. In this paper, for the total heat exchange coefficient of MJTR primary heat exchanger, the inlet and outlet water temperature of the primary and secondary cooling system are known, through calculating the logarithmic average temperature margin, heat exchange area and considering the pressure margin of the secondary cooling system, it is shown that when the differential pressure of the second side is greater than or equal to 35.15 kPa, the ability of the primary heat exchanger has descended, and the primary heat exchanger should be cleaned.
- Primary heat exchanger,
- Total heat exchange coefficient,
- Logarithmic average temperature margin,
- Heat exchange area