Strategies of Factory Tests of Safety Digital Instrumentation and Control System in Nuclear Power Plants

Wang Zhongqiu; Wu Qi; Zhang Yunbo; Liu Le

doi:10.13832/j.jnpe.2015.04.0079

Volume 36 Issue 4

Feb. 2025

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2015 > 36(4): 79-82

Wang Zhongqiu, Wu Qi, Zhang Yunbo, Liu Le. Strategies of Factory Tests of Safety Digital Instrumentation and Control System in Nuclear Power Plants[J]. Nuclear Power Engineering, 2015, 36(4): 79-82. doi: 10.13832/j.jnpe.2015.04.0079

Citation:

Wang Zhongqiu, Wu Qi, Zhang Yunbo, Liu Le. Strategies of Factory Tests of Safety Digital Instrumentation and Control System in Nuclear Power Plants[J]. Nuclear Power Engineering, 2015, 36(4): 79-82. doi: 10.13832/j.jnpe.2015.04.0079

Citation:

PDF( 598 KB)

Strategies of Factory Tests of Safety Digital Instrumentation and Control System in Nuclear Power Plants

doi: 10.13832/j.jnpe.2015.04.0079

Nuclear and Radiation Safety Center, MEP, Beijing, 100082, China

Received Date: 2014-11-18
Rev Recd Date: 2015-05-14

Available Online: 2025-02-15

Abstract

Abstract

Combining the domestic practice and the experiences in the nuclear safety review of the factory tests（FT） of the safety digital instrument and control system（DCS）, DCS FT is identified as several stages according to nuclear safety regulations and standards. The results show that the safety DCS function and performance should be tested. FOAK test strategy should be used discreetly, and not suggested to be used for the first system.
- Nuclear power plants,
- Digital instrumentation and control system,
- Factory test,
- Integration test