Study on Effects of Temperature-Power Curve on MSHIM Strategy

Wang Jinyu; Wang Chuang; Liu Tongxian

doi:10.13832/j.jnpe.2016.01.0109

Volume 37 Issue 1

Feb. 2025

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2016 > 37(1): 109-112

Wang Jinyu, Wang Chuang, Liu Tongxian. Study on Effects of Temperature-Power Curve on MSHIM Strategy[J]. Nuclear Power Engineering, 2016, 37(1): 109-112. doi: 10.13832/j.jnpe.2016.01.0109

Citation:

Wang Jinyu, Wang Chuang, Liu Tongxian. Study on Effects of Temperature-Power Curve on MSHIM Strategy[J]. Nuclear Power Engineering, 2016, 37(1): 109-112. doi: 10.13832/j.jnpe.2016.01.0109

Wang Jinyu, Wang Chuang, Liu Tongxian. Study on Effects of Temperature-Power Curve on MSHIM Strategy[J]. Nuclear Power Engineering, 2016, 37(1): 109-112. doi: 10.13832/j.jnpe.2016.01.0109

Citation:

Wang Jinyu, Wang Chuang, Liu Tongxian. Study on Effects of Temperature-Power Curve on MSHIM Strategy[J]. Nuclear Power Engineering, 2016, 37(1): 109-112. doi: 10.13832/j.jnpe.2016.01.0109

PDF( 706 KB)

Study on Effects of Temperature-Power Curve on MSHIM Strategy

doi: 10.13832/j.jnpe.2016.01.0109

1. Science and Technology on Reactor System Design Technology Laboratory, Nuclear Power Institute of China, Chengdu, 610213, China;
2. Nuclear and Radiation Safety Center, Beijing, 100082, China

Received Date: 2015-05-07
Rev Recd Date: 2015-07-06

Available Online: 2025-02-15

Abstract

Abstract

This paper takes Qinshan phase II NPP（600 MW） as the research target, and applies different reactor temperature-power curves on the reactor, then studies the effects of different reactor temperature-power curves on MSHIM. The analysis indicates that through the optimization of the reactor temperature-power curve, the motion range of control rod could be reduced, and the load-follow of broader scope would be possible.
- Reactor,
- MSHIM strategy,
- Temperature-power curve