Overload Analysis for Conveyor of PWR Fuel Transfer System

Chen Fei; Liu Jishuang; YE Qing; Wang Shilin; MenG Duiqiang; Cai Guohui

doi:10.13832/j.jnpe.2017.03.0119

Volume 38 Issue 3

Feb. 2025

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2017 > 38(3): 119-122

Chen Fei, Liu Jishuang, YE Qing, Wang Shilin, MenG Duiqiang, Cai Guohui. Overload Analysis for Conveyor of PWR Fuel Transfer System[J]. Nuclear Power Engineering, 2017, 38(3): 119-122. doi: 10.13832/j.jnpe.2017.03.0119

Citation:

Chen Fei, Liu Jishuang, YE Qing, Wang Shilin, MenG Duiqiang, Cai Guohui. Overload Analysis for Conveyor of PWR Fuel Transfer System[J]. Nuclear Power Engineering, 2017, 38(3): 119-122. doi: 10.13832/j.jnpe.2017.03.0119

Citation:

PDF( 432 KB)

Overload Analysis for Conveyor of PWR Fuel Transfer System

doi: 10.13832/j.jnpe.2017.03.0119

Fujian Fuqing Nuclear Power CO. LTD., Fuqing, Fujian, 350318, China

Received Date: 2016-07-29
Rev Recd Date: 2017-02-14

Available Online: 2025-02-09

Abstract

Abstract

Before the loading of nuclear fuels in a nuclear power plant,in the underwater test of the conveyor of fuel transfer system,we found that the conveyor failed to drive when it moved to K side（fuel plant side） at the travel end.In this paper,the causes are analyzed and solved in terms of the structure of conveyor of fuel transfer system and upender,and the content of the preventive maintenance project is further optimized.
- Fuel transfer system,
- Conveyor,
- Upender,
- U-shaped groove,
- Rear axis