Technical Research on PWR Fuel Assembly In-Pile Test

Ru Jun; Pang Hua; JiAO Yongjun; Xu Dan; Wang Kun; Liu Yanghua; Wang Haoyu

doi:10.13832/j.jnpe.2017.S1.0175

Volume 38 Issue S1

Feb. 2025

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2017 > 38(S1): 175-177

Ru Jun, Pang Hua, JiAO Yongjun, Xu Dan, Wang Kun, Liu Yanghua, Wang Haoyu. Technical Research on PWR Fuel Assembly In-Pile Test[J]. Nuclear Power Engineering, 2017, 38(S1): 175-177. doi: 10.13832/j.jnpe.2017.S1.0175

Citation:

Ru Jun, Pang Hua, JiAO Yongjun, Xu Dan, Wang Kun, Liu Yanghua, Wang Haoyu. Technical Research on PWR Fuel Assembly In-Pile Test[J]. Nuclear Power Engineering, 2017, 38(S1): 175-177. doi: 10.13832/j.jnpe.2017.S1.0175

Citation:

PDF( 195 KB)

Technical Research on PWR Fuel Assembly In-Pile Test

doi: 10.13832/j.jnpe.2017.S1.0175

1. Science and Technology on Reactor System Design Technology Laboratory, Nuclear Power Institute Of China, Chengdu, 610213, China;
2. Dongfang Electric Corporation Limited, Chengdu, 611731, China

Received Date: 2017-03-09
Rev Recd Date: 2017-05-09

Available Online: 2025-02-09

Abstract

Abstract

PWR fuel assembly in-pile test is the most important procedure to develop a new fuel assembly. In this paper, the general requirements to draw up an irradiation plan and post irradiation examination are presented. The leading test fuel assemblies exhibit satisfactory performance, which indicates that the irradiation and examination plans are proper. The plans can be also used for reference with regard to other fuel assembly irradiation.
- PWR,
- Fuel assembly,
- Irradiation test,
- Examination