Selection and Practice of First of a Kind Test for EPR Unit

Huang Huiming; Yu Weiming; Wu Jiabin

doi:10.13832/j.jnpe.2021.04.0239

Volume 42 Issue 4

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2021 > 42(4): 239-243

Huang Huiming, Yu Weiming, Wu Jiabin. Selection and Practice of First of a Kind Test for EPR Unit[J]. Nuclear Power Engineering, 2021, 42(4): 239-243. doi: 10.13832/j.jnpe.2021.04.0239

Citation:

Huang Huiming, Yu Weiming, Wu Jiabin. Selection and Practice of First of a Kind Test for EPR Unit[J]. Nuclear Power Engineering, 2021, 42(4): 239-243. doi: 10.13832/j.jnpe.2021.04.0239

Huang Huiming, Yu Weiming, Wu Jiabin. Selection and Practice of First of a Kind Test for EPR Unit[J]. Nuclear Power Engineering, 2021, 42(4): 239-243. doi: 10.13832/j.jnpe.2021.04.0239

Citation:

Huang Huiming, Yu Weiming, Wu Jiabin. Selection and Practice of First of a Kind Test for EPR Unit[J]. Nuclear Power Engineering, 2021, 42(4): 239-243. doi: 10.13832/j.jnpe.2021.04.0239

PDF( 2080 KB)

Selection and Practice of First of a Kind Test for EPR Unit

doi: 10.13832/j.jnpe.2021.04.0239

1.
TaiShan Nuclear Power Joint Venture Co., Ltd., Jiangmen, Guangdong, 529228, China
2.
China Nuclear Power Engineering Co., Ltd., Shenzhen, Guangdong, 518172, China

Received Date: 2020-05-19
Rev Recd Date: 2020-08-16
Publish Date: 2021-08-15

Abstract

Abstract

In order to meet the requirements of NNSA, IAEA, NRC, ONR and ASN on the first of a kind test for the new type PWR nuclear power plant, based on the analysis of new design concepts and new design features of the EPR unit and the engineering practice of PWR, this paper proposes a method to determine the first of a kind test by using the control variable selection principle and the five-step selection process. Project practice has proved that this method can ensure the smooth and effective implementation of the commissioning program, and can completely verify the new concept design and the performance of new characteristics, so as to ensure the safe and stable operation of the reactor nuclear power plant. This method can also be applied to other types of PWR nuclear power technology like HPR1000.
- EPR,
- First of a kind test,
- Control variable,
- Selection and practice

FullText(HTML)

References(6)

References

[1]	国家核安全局. 核动力厂运行安全规定: HAF103—2004[S]. 北京: 法律出版社, 2004: 1-25.
[2]	国家核安全局. 核电厂调试程序: HAD103—02[S]. 北京: 法律出版社, 1987: 1394-1426.
[3]	IAEA. Commissioning for nuclear power plants: NS-G-2.9[S]. Vienna: IAEA, 2003: 47.
[4]	NRC. Initial test programs for water-cooled nuclear power plants: RG 1.68[S]. Washington, DC: U. S. Nuclear Regulatory Commission, 2007: 13-22.
[5]	VIERNE Vincent. Design transient specification list of loading conditions[Z]. 2018.
[6]	LHOYER STEPHANIE. Design transient specification categories 3&4 primary and secondary systems[Z]. 2009