Mechanical Reliability Analysis of Control Rod Assembly for HTR-PM

Gao Jianyong; Qing Chen

doi:10.13832/j.jnpe.2021.05.0222

Volume 42 Issue 5

Sep. 2021

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2021 > 42(5): 222-225

Gao Jianyong, Qing Chen. Mechanical Reliability Analysis of Control Rod Assembly for HTR-PM[J]. Nuclear Power Engineering, 2021, 42(5): 222-225. doi: 10.13832/j.jnpe.2021.05.0222

Citation:

Gao Jianyong, Qing Chen. Mechanical Reliability Analysis of Control Rod Assembly for HTR-PM[J]. Nuclear Power Engineering, 2021, 42(5): 222-225. doi: 10.13832/j.jnpe.2021.05.0222

Gao Jianyong, Qing Chen. Mechanical Reliability Analysis of Control Rod Assembly for HTR-PM[J]. Nuclear Power Engineering, 2021, 42(5): 222-225. doi: 10.13832/j.jnpe.2021.05.0222

Citation:

Gao Jianyong, Qing Chen. Mechanical Reliability Analysis of Control Rod Assembly for HTR-PM[J]. Nuclear Power Engineering, 2021, 42(5): 222-225. doi: 10.13832/j.jnpe.2021.05.0222

PDF( 2573 KB)

Mechanical Reliability Analysis of Control Rod Assembly for HTR-PM

doi: 10.13832/j.jnpe.2021.05.0222

Shenzhen Branch, Suzhou Nuclear Power Research Institute, Shenzhen, Guangdong, 518035, China

Received Date: 2020-08-31
Rev Recd Date: 2020-11-26
Publish Date: 2021-09-30

Abstract

Abstract

The article analyzes the forces and weaknesses of the control rod assembly in the high temperature gas cooled reactor (HTGR) demonstration project-pebble bed modular HTGR plant (HTR-PM), using the the mechanical reliability theory and mechanical simulation, and identifies the weaknesses at the connection of the control rod assembly. In the reliability-life calculation method based on the probabilistic fracture mechanics, in combination with the influence of irradiation on the fatigue life model and in consideration of the stress, the authors establish the reliability-life model to calculate the reliability-life of HTR-PM control rod assembly at the irradiation attenuation coefficient of 0.7. The calculation results show that at the reliability level of 0.99, the life of HTR-PM control rod assembly is about 150,000 action cycles, and that the irradiation has a great influence on the life of the control rod assembly. In view of what mentioned above, this paper can provide reference for the equipment reliability management of the HTR-PM control rod assembly.

FullText(HTML)

References(8)

References

[1]	周惠忠,刁兴中,黄志勇,等. HTR-10控制棒系统的试验与调试[J]. 核动力工程,2002, 23(1): 41-44. doi: 10.3969/j.issn.0258-0926.2002.01.011
[2]	闫贺,杨磊,张作鹏,等. 高温气冷堆控制棒驱动机构冷态落棒试验研究[J]. 核科学与工程,2015, 35(3): 479-485. doi: 10.3969/j.issn.0258-0918.2015.03.013
[3]	袁润,刘延山. 高温气冷堆用控制棒位置指示器的可靠性设计[J]. 江苏理工大学学报,1997, 18(1): 65-69.
[4]	李良巧. 机械可靠性设计与分析[M]. 北京: 国防工业出版社, 1998: 322.
[5]	华能山东石岛湾核电厂. HTR-PM控制棒组件设计图册[Z]. 2008.
[6]	华能山东石岛湾核电厂. HTR-PM控制棒组件技术规格书[Z]. 2008
[7]	PROVAN J W. 概率断裂力学和可靠性[M]. 航空航天工业部《AFFD》系统工程办公室译. 北京: 航空工业出版社, 1989: 348.
[8]	GOSATOMENERGONADZOR U. Rules of equipment and pipelines strength calculation of nuclear power plants: PNAE-G-002-86[Z]. Moscow: Energoatomizdat Publishing House, 1989.