Citation: | Yang Ning, Li Huaqi, Zhang Xinyi, Tian Xiaoyan, Zhang Qiang. Fine Calculation of Decay Heat Power in Xi’an Pulsed Reactor[J]. Nuclear Power Engineering, 2021, 42(6): 24-31. doi: 10.13832/j.jnpe.2021.06.0024 |
[1] |
黄洪文,刘汉刚,米向秒,等. 池式研究堆衰变热计算与实验研究[J]. 核动力工程,2012, 33(5): 12-15,21. doi: 10.3969/j.issn.0258-0926.2012.05.003
|
[2] |
杨磊, 桂学文, 商学利, 等. RELAP5程序衰变热计算误差及其对典型事故进程的影响分析[C]//第十四届全国反应堆热工流体学术会议暨中核核反应堆热工水力技术重点实验室2015年度学术年会论文集. 北京: 清华大学先进反应堆工程与安全教育部重点实验室, 2015: 827-831.
|
[3] |
孔军红,徐銤. 实验快堆FFR燃料的衰变热计算[J]. 核动力工程,1993, 14(5): 469-472.
|
[4] |
MAEDA S, SEKINE T, AOYAMA T. Measurement and analysis of decay heat of fast reactor spent MOX fuel[J]. Annals of Nuclear Energy, 2004, 31(10): 1119-1133. doi: 10.1016/j.anucene.2003.11.002
|
[5] |
陈海英,王韶伟,韩静茹,等. 核电厂堆芯衰变热计算及影响因素分析[J]. 工业安全与环保,2014, 40(9): 68-70,89. doi: 10.3969/j.issn.1001-425X.2014.09.022
|
[6] |
廖玮,张敏杰,田宇. 典型压水堆停堆后衰变热分布变化规律研究[J]. 河南科技,2016, 43(1): 133-135. doi: 10.3969/j.issn.1003-5168.2016.01.045
|
[7] |
NOH J M, BAE K M. Decay heat analysis of a VHTR Core using the HELIOS and ORIGEN2 codes[C]//Proceedings of ICAPP 2008. U.S.: American Nuclear Society, 2009: 2533-2539.
|
[8] |
CROFF A G. A user’s manual for the ORIGEN2 computer code[R]. Tennessee: Oak Ridge National Laboratory, 1980.
|
[9] |
杨宁,唐秀欢,张文首,等. 极端事故假设下西安脉冲堆源项计算[J]. 核动力工程,2014, 35(6): 11-16.
|
[10] |
CROFF A G. Comparison of experimentally determined spent fuel compositions with ORIGEN2 calculations[R]. Oak Ridge: Oak Ridge National Laboratory, 1981.
|
[11] |
HEEB C M. Comparison of spent fuel decay heat rate ORIGEN2 prediction and calorimeter measurements[R]. PNL-SA-13870, Richland: Pacific Northwest Lab, 1986.
|
[12] |
郭和伟,江新标,赵柱民,等. 西安脉冲堆WIMS和MCNP耦合燃耗计算方法[J]. 科技导报,2012, 30(20): 52-55. doi: 10.3981/j.issn.1000-7857.2012.20.008
|
[13] |
阿景烨. γ能谱法无损测定铀氢锆反应堆单棒燃料元件燃耗技术研究[Z]. 西安: 西北核技术研究所, 2006.
|
[14] |
KOK K D. Nuclear engineering handbook[M]. Boca Raton: CRC Press, 2009: 647.
|
[15] |
国家能源局. 轻水堆核燃料衰变热功率的计算: NB/T 20056-2011[S]. 北京: 中国原子能出版社, 2011: 4-6, 37-38.
|