Research on Automatic Test Technology for Response Time of Multi-Controller Based on Synchronous Triggering Mechanism

Tian Haowen; He Xianjian; Wen Jing; Chen Zhao; Yuan Shengjun

doi:10.13832/j.jnpe.2021.S2.0154

Volume 42 Issue S2

Dec. 2021

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2021 > 42(S2): 154-158

Tian Haowen, He Xianjian, Wen Jing, Chen Zhao, Yuan Shengjun. Research on Automatic Test Technology for Response Time of Multi-Controller Based on Synchronous Triggering Mechanism[J]. Nuclear Power Engineering, 2021, 42(S2): 154-158. doi: 10.13832/j.jnpe.2021.S2.0154

Citation:

Tian Haowen, He Xianjian, Wen Jing, Chen Zhao, Yuan Shengjun. Research on Automatic Test Technology for Response Time of Multi-Controller Based on Synchronous Triggering Mechanism[J]. Nuclear Power Engineering, 2021, 42(S2): 154-158. doi: 10.13832/j.jnpe.2021.S2.0154

Citation:

Tian Haowen, He Xianjian, Wen Jing, Chen Zhao, Yuan Shengjun. Research on Automatic Test Technology for Response Time of Multi-Controller Based on Synchronous Triggering Mechanism[J]. Nuclear Power Engineering, 2021, 42(S2): 154-158. doi: 10.13832/j.jnpe.2021.S2.0154

PDF( 13524 KB)

Research on Automatic Test Technology for Response Time of Multi-Controller Based on Synchronous Triggering Mechanism

doi: 10.13832/j.jnpe.2021.S2.0154

1.
Nuclear Power Institute of China, Chengdu, 610213, China
2.
Science and Technology on Reactor System Technology Laboratory, Nuclear Power Institute of China, Chengdu, 610213, China
3.
Chongqing CEPREI Industrial Technology Research Institute Co., Ltd., Chongqing, 401332, China

Received Date: 2021-07-19
Accepted Date: 2021-12-06
Rev Recd Date: 2021-09-27
Publish Date: 2021-12-29

Abstract

Abstract

Existing test methods for response time based on oscilloscope generally have many defects, including limited test sample base, large test data error, and low test efficiency, which do not meet the requirements of test preciseness and current industrialization development. To solve these problems, this research, based on the distributed test platform of multi-controller, designs an automatic test technology for response time based on synchronous triggering mechanism, through analyzing the existing test technology for response time of Distributed Control System (DCS) in nuclear power plant. Practice has proved that this automatic test technology for response time has technical advantages and practicability in the field of industrial control, and has high popularization value.
- Distributed control system (DCS),
- Response time,
- Automatic test,
- Synchronous triggering

FullText(HTML)

References(5)

References

[1]	Nuclear Regulatory Commission. Guidance on digital computer real-time performance: NUREG-0800, BTP7-21[S]. U. S.: Nuclear Regulatory Commission, 2006: 7-21.
[2]	汪绩宁,周爱平,郄永学,等. 核电厂反应堆保护系统紧急停堆响应时间分析及测试[J]. 核动力工程,2012, 33(2): 5-10. doi: 10.3969/j.issn.0258-0926.2012.02.002
[3]	王常力, 罗安. 分布式控制系统(DCS)设计与应用实例[M]. 第二版. 北京: 电子工业出版社, 2010: 205-269.
[4]	刘国发, 郭文琪. 核电厂仪表与控制[M]. 北京: 原子能出版社, 2010: 215-267.
[5]	盛骤, 谢式千, 潘承毅. 概率论与数理统计[M]. 北京: 高等教育出版社, 2008: 46-54.