Research on Sensitivity Analysis Model of Grounding Measurement Capacitance Rod Position Sensor

Li Yanlin; Qin Benke; Bo Hanliang

doi:10.13832/j.jnpe.2024.06.0139

Volume 45 Issue 6

Dec. 2024

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2024 > 45(6): 139-146

Li Yanlin, Qin Benke, Bo Hanliang. Research on Sensitivity Analysis Model of Grounding Measurement Capacitance Rod Position Sensor[J]. Nuclear Power Engineering, 2024, 45(6): 139-146. doi: 10.13832/j.jnpe.2024.06.0139

Citation:

Li Yanlin, Qin Benke, Bo Hanliang. Research on Sensitivity Analysis Model of Grounding Measurement Capacitance Rod Position Sensor[J]. Nuclear Power Engineering, 2024, 45(6): 139-146. doi: 10.13832/j.jnpe.2024.06.0139

Citation:

PDF( 14356 KB)

Research on Sensitivity Analysis Model of Grounding Measurement Capacitance Rod Position Sensor

doi: 10.13832/j.jnpe.2024.06.0139

Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing, 100084, China

Received Date: 2024-01-26
Rev Recd Date: 2024-03-06
Publish Date: 2024-12-17

Abstract

Abstract

Control rod position sensor is one of the six core components of the control rod hydraulic drive system, which provides the only true rod position indication for nuclear reactors. The grounding measurement capacitance rod position sensor has the advantages of high precision and strong anti-interference ability. Control rod positions can be measured step-by-step by this kind of sensors. In order to clarify the capacitive sensitive mechanism of this kind of capacitance rod position sensors, the sensitivity analysis model of the sensor is established by conformal mapping. Model modification and model validation are conducted by the numerical simulation and results of the static calibration experiments. The results show that the static measurement characteristics of the grounding measurement capacitance rod position sensor can be accurately analyzed by the sensitivity analysis model. The relative error between the results obtained by the sensitive analysis model and experiments is 3.4%. The sensitivity analysis model can be used for structural analysis and optimal design of the sensor.
- Grounding measurement,
- Rod position sensor,
- Sensitivity analysis model,
- Conformal mapping

FullText(HTML)

References(22)

References

[1]	薄涵亮,郑文祥,董铎,等. 水力驱动控制棒静态特性实验研究[J]. 核动力工程,2001, 22(1): 11-14. doi: 10.3969/j.issn.0258-0926.2001.01.003
[2]	BO H L, ZHENG Y H, ZHENG W X, et al. Study on step-up characteristic of hydraulic control rod driving system[J]. Nuclear Engineering and Design, 2002, 216(1-3): 69-75. doi: 10.1016/S0029-5493(02)00030-4
[3]	ZHENG Y H, BO H L, DONG D. The study on the hydraulic control rod driving system in cyclical swing[J]. Nuclear Engineering and Design, 2007, 237(1): 100-106. doi: 10.1016/j.nucengdes.2006.05.003
[4]	ISHIDA T, IMAYOSHI S, YORITSUNE T, et al. Development of in-vessel type control rod drive mechanism for marine reactor[J]. Journal of Nuclear science and Technology, 2001, 38(7): 557-570. doi: 10.1080/18811248.2001.9715067
[5]	胡守印,苏庆善,孙栓樑,等. HTR-10控制棒控制系统设计[J]. 核动力工程,2001, 22(6): 520-522,529. doi: 10.3969/j.issn.0258-0926.2001.06.011
[6]	雷晴. CPR1000、AP1000棒位指示和监测系统浅析[J]. 核动力工程,2009, 30(S6): 45-48.
[7]	蒋跃元,杨念祖,王文然. 数字模拟棒位探测器的研究[J]. 核动力工程,1997, 18(1): 77-81.
[8]	JIANG Y Y, WANG W R, LU L, et al. Study on gray code control rod position indicator[J]. Nuclear Engineering and Design, 1998, 186(3): 429-436. doi: 10.1016/S0029-5493(98)00281-7
[9]	李艺,张瑞,马一鸣,等. 秦山核电320MW机组实测棒位指示系统光点指示异常分析与改进[J]. 仪器仪表用户,2015, 22(4): 83-87. doi: 10.3969/j.issn.1671-1041.2015.04.029
[10]	ZHAO A, JIN N D, ZHAI L S, et al. Liquid holdup measurement in horizontal oil–water two-phase flow by using concave capacitance sensor[J]. Measurement, 2014, 49: 153-163. doi: 10.1016/j.measurement.2013.11.036
[11]	ZHAI L S, JIN N D, GAO Z K, et al. Liquid holdup measurement with double helix capacitance sensor in horizontal oil–water two-phase flow pipes[J]. Chinese Journal of Chemical Engineering, 2015, 23(1): 268-275. doi: 10.1016/j.cjche.2014.10.010
[12]	HANNI J R, VENKATA S K. A novel helical electrode type capacitance level sensor for liquid level measurement[J]. Sensors and Actuators A: Physical, 2020, 315: 112283. doi: 10.1016/j.sna.2020.112283
[13]	李彦霖,秦本科,薄涵亮. 双螺旋结构电容式棒位测量传感器偏心性能研究[J]. 原子能科学技术,2021, 55(11): 2094-2100. doi: 10.7538/yzk.2020.youxian.0830
[14]	李彦霖,秦本科,薄涵亮. 基于轮转电极的多电极电容式棒位测量传感器静态特性研究[J]. 原子能科学技术,2022, 56(4): 664-671. doi: 10.7538/yzk.2021.youxian.0294
[15]	LI Y L, QIN B K, BO H L. Research on multi-electrode capacitance rod position measurement sensor for NHR-200[J]. Annals of Nuclear Energy, 2022, 166: 108730. doi: 10.1016/j.anucene.2021.108730
[16]	LI Y L, QIN B K, BO H L. Research on eccentricity performance of winding wire capacitance rod position measurement sensor[J]. Annals of Nuclear Energy, 2021, 161: 108403. doi: 10.1016/j.anucene.2021.108403
[17]	LI Y L, QIN B K, YANG L Q, et al. Static calibration experiments of capacitance control rod position measurement sensor[J]. Progress in Nuclear Energy, 2022, 152: 104370. doi: 10.1016/j.pnucene.2022.104370
[18]	CATTANEO P W. Capacitances in micro-strip detectors: a conformal mapping approach[J]. Solid-State Electronics, 2010, 54(3): 252-258. doi: 10.1016/j.sse.2009.09.030
[19]	IGREJA R, DIAS C J. Extension to the analytical model of the interdigital electrodes capacitance for a multi-layered structure[J]. Sensors and Actuators A: Physical, 2011, 172(2): 392-399. doi: 10.1016/j.sna.2011.09.033
[20]	袁聿海. “串并联”法在计算平行板电容器电容中的应用[J]. 湖南文理学院学报: 自然科学版,2005, 17(1): 22-23,49.
[21]	陈鑫鑫,陈钢. 开缝椭圆柱板电容器的电容[J]. 物理与工程,2016, 26(6): 102-105. doi: 10.3969/j.issn.1009-7104.2016.06.024
[22]	吴晓媛,杨雁,贺青,等. 基于保角变换的微小电容标准建模与设计[J]. 仪器仪表学报,2019, 40(9): 116-123.