CPR1000反应堆压力容器制造无损检验与役前检查不一致的问题分析

EI、CA、JST收录
核领域 T1 级期刊
北大中文核心期刊
中国科技核心期刊

官方微信

作者登录专家审稿编辑办公主编办公

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

CPR1000反应堆压力容器制造无损检验与役前检查不一致的问题分析

李家康, 刘毅, 张进, 刘飞华, 邱振生, 董义令

文章导航 > 核动力工程 > 2017 > 38(3): 77-80

李家康, 刘毅, 张进, 刘飞华, 邱振生, 董义令. CPR1000反应堆压力容器制造无损检验与役前检查不一致的问题分析[J]. 核动力工程, 2017, 38(3): 77-80. doi: 10.13832/j.jnpe.2017.03.0077

引用本文:

李家康, 刘毅, 张进, 刘飞华, 邱振生, 董义令. CPR1000反应堆压力容器制造无损检验与役前检查不一致的问题分析[J]. 核动力工程, 2017, 38(3): 77-80. doi: 10.13832/j.jnpe.2017.03.0077

Li Jiakang, Liu Yi, Zhang Jin, Liu Feihua, Qiu Zhensheng, Dong Yiling. Analysis on Problem of Difference between Non-Destructive Examination in Manufacturing and Pre-Service Inspection for CPR1000 Reactor Pressure Vessel[J]. Nuclear Power Engineering, 2017, 38(3): 77-80. doi: 10.13832/j.jnpe.2017.03.0077

Citation:

Li Jiakang, Liu Yi, Zhang Jin, Liu Feihua, Qiu Zhensheng, Dong Yiling. Analysis on Problem of Difference between Non-Destructive Examination in Manufacturing and Pre-Service Inspection for CPR1000 Reactor Pressure Vessel[J]. Nuclear Power Engineering, 2017, 38(3): 77-80. doi: 10.13832/j.jnpe.2017.03.0077

李家康, 刘毅, 张进, 刘飞华, 邱振生, 董义令. CPR1000反应堆压力容器制造无损检验与役前检查不一致的问题分析[J]. 核动力工程, 2017, 38(3): 77-80. doi: 10.13832/j.jnpe.2017.03.0077

引用本文:

李家康, 刘毅, 张进, 刘飞华, 邱振生, 董义令. CPR1000反应堆压力容器制造无损检验与役前检查不一致的问题分析[J]. 核动力工程, 2017, 38(3): 77-80. doi: 10.13832/j.jnpe.2017.03.0077

Li Jiakang, Liu Yi, Zhang Jin, Liu Feihua, Qiu Zhensheng, Dong Yiling. Analysis on Problem of Difference between Non-Destructive Examination in Manufacturing and Pre-Service Inspection for CPR1000 Reactor Pressure Vessel[J]. Nuclear Power Engineering, 2017, 38(3): 77-80. doi: 10.13832/j.jnpe.2017.03.0077

Citation:

Li Jiakang, Liu Yi, Zhang Jin, Liu Feihua, Qiu Zhensheng, Dong Yiling. Analysis on Problem of Difference between Non-Destructive Examination in Manufacturing and Pre-Service Inspection for CPR1000 Reactor Pressure Vessel[J]. Nuclear Power Engineering, 2017, 38(3): 77-80. doi: 10.13832/j.jnpe.2017.03.0077

CPR1000反应堆压力容器制造无损检验与役前检查不一致的问题分析

doi: 10.13832/j.jnpe.2017.03.0077

中广核工程有限公司, 广东深圳, 518172

作者简介:
李家康（1989—），男，工程师，学士学位，现主要从事核岛设备无损检验设计工作

中图分类号: TL351⁺.6
计量
- 文章访问数: 10
- HTML全文浏览量: 4
- PDF下载量: 0
- 被引次数: 0
出版历程
- 收稿日期: 2016-08-17
- 修回日期: 2016-12-30
- 网络出版日期: 2025-02-09

Analysis on Problem of Difference between Non-Destructive Examination in Manufacturing and Pre-Service Inspection for CPR1000 Reactor Pressure Vessel

China Nuclear Power Engineering Co. Ltd., Shenzhen, Guangdong, 518172, China

摘要: 重点分析RCC-M和RSE-M规范的无损检验要求,梳理出中国改进型三环路压水堆(CPR1000)反应堆压力容器(RPV)制造无损检验与役前检查要求的差异项。对差异项开展分析研究,从检验范围、扫查方向、记录水平、显示尺寸测量和评价标准等方面提出针对性的技术改进方案,尽可能解决由于制造和役前检查技术差异而产生检验结果不一致的工程问题。
- 中国改进型三环路压水堆(CPR1000) /
- 反应堆压力容器 /
- 制造无损检验 /
- 役前检查 /
- 不一致
Abstract: Through the analysis on the requirements of RCC-M and RSE-M,the paper comprehensively describes the difference between the non-destructive examination in manufacturing and pre-service inspection.The technical improvement scheme is proposed in terms of the inspection extent,scanning direction,recordable condition and acceptance criteria,in order to solve the engineering problem of the different inspection results caused by different technologies used in manufacturing examination and pre-service inspection.
- CPR1000 /
- Reactor pressure vessel /
- Non-destructive examination in manufacturing /
- Pre-service inspection /
- Difference

参考文献(0)

资源附件(0)

计量

文章访问数: 10
HTML全文浏览量: 4
PDF下载量: 0
被引次数: 0

/

下载: 全尺寸图片幻灯片

分享

用微信扫码二维码

分享至好友和朋友圈

返回