Diagnostic of Loose Parts Event in Water Chamber of Steam Generator

Hu Jianrong; Liu Caixue; Luo Ting; Jian Jie; Yang Taibo; Li Xiang

doi:10.13832/j.jnpe.2021.04.0254

Volume 42 Issue 4

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Nuclear Power Engineering > 2021 > 42(4): 254-258

Hu Jianrong, Liu Caixue, Luo Ting, Jian Jie, Yang Taibo, Li Xiang. Diagnostic of Loose Parts Event in Water Chamber of Steam Generator[J]. Nuclear Power Engineering, 2021, 42(4): 254-258. doi: 10.13832/j.jnpe.2021.04.0254

Citation:

Hu Jianrong, Liu Caixue, Luo Ting, Jian Jie, Yang Taibo, Li Xiang. Diagnostic of Loose Parts Event in Water Chamber of Steam Generator[J]. Nuclear Power Engineering, 2021, 42(4): 254-258. doi: 10.13832/j.jnpe.2021.04.0254

Citation:

PDF( 2300 KB)

Diagnostic of Loose Parts Event in Water Chamber of Steam Generator

doi: 10.13832/j.jnpe.2021.04.0254

Nuclear Power Institute of China, Chengdu, 610213, China

Received Date: 2020-07-06
Rev Recd Date: 2021-02-25
Publish Date: 2021-08-15

Abstract

Abstract

During the hot performance test in a nuclear power plant, the alarm event of the loose parts of the steam generator occurred. In order to explore the alarm cause for the loose parts and evaluate the damage of the equipment, it is necessary to confirm the loose parts in time. By establishing the diagnosis and analysis model of the loose parts, the original data of the loose event is analyzed in detail, and the propagation speed of the loose signal, the quality and energy of the loose parts are estimated. Finally, the harmfulness of the loose alarm event is evaluated. The results show that the loose part in the steam generator is a moving metal part, which is a loose part of the internal structure of the reactor. The impact frequency of the loose part is 8700~9300 Hz, the peak range of impact acceleration is 3g~90g, the propagation group velocity of the loose signal is 3200~3300 m/s, and the mass of the loose part is estimated to be about 0.1 kg. The impact energy is 0.45~0.89 J. The diagnostic results of mass and energy are in good agreement with the actual situation, which shows that the proposed method is effective.
- Steam generator,
- Loose parts event,
- Diagnosis,
- Loose parts location,
- Mass estimation

FullText(HTML)

References(9)

References

[1]	赵志德,何宏龙. 反应堆下部堆内构件的损坏分析和修复方案[J]. 核电工程与技术,2007(2): 8-11.
[2]	李如源,杨璋,周亚平. 田湾核电厂1号机组主泵松脱部件报警事件诊断分析[J]. 核动力工程,2011, 32(3): 127-129.
[3]	PARK G Y, CHEON S W, LEE C K, et al. An estimation method of for impact location of loose parts[J]. Progress in Nuclear Energy, 2006, 48(4): 360-370. doi: 10.1016/j.pnucene.2005.09.012
[4]	YOON D B, PARK J H, CHOI Y C, et al. Enhancement of impact mass estimation algorithm for a plate type structure[J]. Materials Transactions, 2007, 48(6): 1249-1253. doi: 10.2320/matertrans.I-MRA2007854
[5]	方力先,楼永坚,倪益华,等. 基于神经网络的松动部件监测系统小波质量估计方法研究[J]. 原子能科学技术,2004, 38(4): 321-323. doi: 10.3969/j.issn.1000-6931.2004.04.008
[6]	MAYO C W. Loose-part mass and energy estimation[J]. Progress in Nuclear Energy, 1999, 34(3): 263-282. doi: 10.1016/S0149-1970(98)00010-9
[7]	刘才学,汪成元,郑武元,等. 核电站LPMS研制[J]. 核动力工程,2010, 31(1): 97-101.
[8]	胡建荣,罗婷,简捷,等. 防城港核电站堆内中子通量测量系统指套管碰磨分析[J]. 核科学与工程,2017, 37(5): 750-755. doi: 10.3969/j.issn.0258-0918.2017.05.007
[9]	The American Society of Mechanical Engineers. Standards and Guides for Operation and Maintenance of Nuclear Power Plants: ASME OM-S/G—2007[S]. New York: The American Society of Mechanical Engineers, 2007: 43-59.